Insufficient Memory, Some Held Jobs Will Not Be Restored; Memory Full; Complex Page, Some Data May Not Have Printed; Defective Flash Detected - Lexmark X925 User Manual

Troubleshooting

37 Insufficient memory, some held jobs will not be restored

The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Touch Continue to clear the message.

38 Memory full

Try one or more of the following:
•
Touch Cancel job to clear the message.
• Install additional printer memory.

39 Complex page, some data may not have printed

Try one or more of the following:
•
Touch Continue to clear the message and continue printing.
•
Cancel the current print job.
• Install additional printer memory.

51 Defective flash detected

Try one or more of the following:
•
Touch Continue to clear the message and continue printing.
• Cancel the current print job.

52 Not enough free space in flash memory for resources

Try one or more of the following:
•
Touch Continue to clear the message and continue printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
•
Delete fonts, macros, and other data stored in flash memory.
•
Upgrade to a larger capacity flash memory card.

53 Unformatted flash detected

Try one or more of the following:
•
Touch Continue to stop the defragment operation and continue printing.
•
Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.

54 Serial option [x] error

Try one or more of the following:
•
Check that the serial cable is properly connected and is the correct one for the serial port.
•
Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer
and host computer.
269