Removing A Printer Hard Disk - Lexmark X925 User Manual

Additional printer setup
Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
1
Access the system board.
for more information, see
2
Remove the metal bracket from the printer hard disk using a flathead screwdriver.
3
Connect the printer hard disk interface cable into the receptacle of the ISP board.
4
Reattach the system board cover.

Removing a printer hard disk

The printer hard disk is preinstalled in this device.
Note: This task requires a flathead screwdriver.
"Accessing the system board" on page 35
44