Troubleshooting - Samsung SCB-6001 User Manual

trouBLeSHootinG

PROBLEM
Nothing appears on the screen.
The image on the screen is dim.
The image on the screen is dark.
The camera is not working
properly, and the surface of the
camera is hot.
The SENS-UP function does not
work.
The Motion Detection function
does not work.
Color is not correct.
The screen flickers continually.
RS-485 communication is not
available.
y Check that the power cord and line connection between the camera and
monitor are properly connected.
y When the camera's HD-SDI BNC output is directly connected to the
monitor's BNC terminal:
Make sure the monitor supports HD-SDI signal input.
y When the camera's HD-SDI BNC output is connected to the DVR: Make
sure the DVR supports HD-SDI signal input.
y HD-SDI output is converted into other format such as DVI and VGA by
using video converter: Make sure the converter's HD-SDI input format
supports the product's output video format.
y Is lens stained with dirt? Clean your lens with soft, clean cloth.
y Set the monitor to the proper condition.
y If the camera is exposed to very strong light, change the camera position.
y Adjust the contrast feature of the monitor.
y Check that you have properly connected the camera to an appropriate
power source.
y Check that AGC of EXPOSURE SETUP menu is 'OFF'.
y Check that MOTION DET of SPECIAL SETUP menu is 'OFF'.
y Check the setting of WHITE BAL SETUP menu .
y Ensure the camera is not pointing towards the sun.
y Is the camera framing the sun or other bright light source?
y HD-SDI video may not appear to be normal if distance exceeds the
maximum transferrable distance.
y When a BNC cable adaptor is used to combine two or more BNC cables
for distributed HD-SDI video transfer, make sure the impedance of the
adaptor is 75Ω. Otherwise, it may cause shorter transfer distance or
broken video transfer.
y Check RS-485 communication settings.
SOLUTION
English _35