Samsung SCB-1000 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SCB-1000
  6. User manual
Samsung SCB-1000 User Manual

Samsung SCB-1000 User Manual

Low light, high resolution, day & night camera
Hide thumbs Also See for SCB-1000:
Table of Contents

Advertisement

Quick Links

Low Light, High Resolution,
Day & Night Camera
User Manual
SCB-1000

Advertisement

Table of Contents
loading

Related Manuals for Samsung SCB-1000

Summary of Contents for Samsung SCB-1000

  • Page 1 Low Light, High Resolution, Day & Night Camera User Manual SCB-1000...

  • Page 2: User Manual

    Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
  • Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCB-1000 SERIES • NTSC MODEL • PAL MODEL SCB-1000ND SCB-1000PD SCB-1000NA SCB-1000PA SCB-1000PH ■ MODEL DESCRIPTION •...

  • Page 4: Safety Information

    safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CAUTION: COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

  • Page 5: Personal Injury

    fi re or electric shock. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifi cations or attempted repair.) When cleaning, do not spray water directly onto parts of the product.

  • Page 6: Fcc Statement

    safety information FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.

  • Page 7: Important Safety Instructions

    important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi...
  • Page 8 contents INTRODUCTION Features What’s included Component names and functions Lens CONNECTION Connecting to a monitor Connecting to power CAMERA OPERATION Menu Settings TROUBLESHOOTING Troubleshooting SPECIFICATIONS Specifi cations 8_ contents...

  • Page 9: Introduction

    SSNR (Samsung Super Noise Reduction) By using built-in SSNR function manufactured by SAMSUNG TECHWIN, the amount of low illuminance noise has been signifi cantly reduced, and the signal-to-noise ratio (S/N) as well as horizontal resolution have been improved, resulting in a clear and sharp image display even in the dark.

  • Page 10: Connection

    Check if the following items are included in the product package. Low Light, High Resolution, Low Light, High Resolution, Day & Night Camera Day & Night Camera Quick Set-up Guide SCB-1000 SCB-1000 SCB-1000 User Manual Quick Set-up Guide Auto iris lens connection plug...

  • Page 11: Component Names And Functions

    COMPONENT NAMES AND FUNCTIONS FRONT VIEW SIDE VIEW CCD protection cap : Please cover the CCD SENSOR when not using it. C-Mount lens adaptor : Please attach the C-Mount lens here. CS-Mount lens adaptor : Please remove the C-MOUNT lens adaptor and then attach it. Back Focus clamp screw : Please loosen the clamp screw with a screwdriver before adjusting the Back Focal length.

  • Page 12: Rear View

    introduction REAR VIEW * High Voltage Type (SCB-1000PH) Video output terminal : Sends video signal and connects to the video input terminal of the monitor. Auto iris lens selection switch : Please change the mode to DC or VIDEO depending on the type of auto iris lens being used.
  • Page 13 LENS Lenses are sold separately. Lenses such as an auto iris lens, CS-Mount lens and C-Mount lens can be used.  Please keep the lens clean.  Any foreign objects and fi ngermarks on the lens can cause inferior image quality in low light level conditions.
  • Page 14 introduction Please insert the connection plug that is connected to the auto iris lens cable into the auto lens connector, which is located on the side of the camera. Please set the lens selection switch, located on the side of the camera, to DC or VIDEO depending on the type of auto iris lens which is being used.
  • Page 15 Please attach the CS-Mount lens to the camera by screwing it in clockwise. CS-mount adaptor  Please use the specifi ed lens connection parts as shown in the picture below. The use of the wrong sized parts of the wrong size may cause damage to the inside of the camera or result in poor fi...

  • Page 16: Connecting To A Monitor

    connection CONNECTING TO A MONITOR Please connect the video output terminal located on the back of the camera to the monitor. CCD Camera Monitor The connection method varies depending on the type of monitor and accessories. Please refer to the user’s manual for each instrument. Please turn off the power when connecting.

  • Page 17: Camera Operation

    High Voltage Type (AC230V, 50Hz) When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm #22 (0.33mm #20 (0.52mm #18 (0.83mm Resistance value(—/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 As shown in the table above, voltage decreases as the wire gets longer.
  • Page 18 (Backlight compensation) HIGH ● ● ● MIDDLE AGC (Auto Gain control) ● HIGH ● ● ● SSNR MIDDLE ● (Samsung super noise reduction) HIGH ● ● SENS-UP (Low illuminance) AUTO ● ● ● IMAGE ADJ CAMERA ID COLOR ● ● ●...
  • Page 19 SETUP LENS Select any function Modes can be SHUTTER you wish to operate changed using the by using the UP and LEFT and RIGHT WHITE BAL. DOWN buttons. buttons. BACKLIGHT MIDDLE SSNR SENS-UP SPECIAL EXIT Select a desired function using the Up and Down buttons. Place the cursor over a desired item.
  • Page 20 camera operation SHUTTER (CONDITION AND SPEED CONTROL) Auto or manual control can be selected. When the SETUP menu is on the screen, SETUP please position the arrow to point to LENS ‘SHUTTER’ by using the DOWN button. SHUTTER Please select the shutter mode by pressing WHITE BAL.
  • Page 21 ATW(Auto Tracking White Balance) : This mode can be used within the color temperature range 1,800°K ~ 10,500°K (Ex. fl uorescent light, outdoor, sodium vapor lamp or inside tunnels) AWC(Auto White Balance Control) : Please press the SETUP button while the camera is directed at a piece of white paper to obtain the optimum state under current illumination.
  • Page 22 camera operation HIGH/MIDDLE/LOW : You can adjust the sensitivity of Backlight Compensation. OFF : BLC function doesn´t operate. BACKLIGHT ON BACKLIGHT OFF AGC (AUTO GAIN CONTROL) The higher gain level, the screen gets brighter and the level of noise also increases. The BRIGHTNESS can be adjusted within the range of 1~70.
  • Page 23 SSNR (SAMSUNG SUPER NOISE REDUCTION) The background noise in the low light level decreases automatically as the level of gain changes. Please position the arrow to point to ‘SSNR’ SETUP on the SETUP menu by using the UP and LENS DOWN buttons.
  • Page 24 camera operation  The maximum storage magnifi cation in low light level can be adjusted by pressing the SETUP button in ‘AUTO’ mode.(X2~X128)  As the magnifi cation increases, the screen gets brighter; moving object gets more afterimage.  If storage magnifi cation is increased while SENS UP is operating, it may cause noise, and spots may appear;...
  • Page 25  SHARPNESS : SHARPNESS The outline of the video image becomes Level cleaner and more distinctive as the level of SHARPNESS increases. If the level goes up excessively, however, it may af- Press SET to Return fect the video image and generate noise. Please press the SETUP button.
  • Page 26 camera operation 5) When a name has been chosen, please FRONT DOOR select a position for the name display. Please move the cursor onto ‘POS’ and then press the SETUP button. The name will appear at the top left hand corner.
  • Page 27 MOTION DETECTION : This product has a feature that allows you to observe movements of objects in 4 different areas on the screen, and the words ‘MOTION DETECTED’ appear on the screen when movement is detected; You can monitor activity more effi cient. 1) Please press the SETUP button.

  • Page 28: Troubleshooting

    troubleshooting TROUBLESHOOTING If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. Problems Troubleshooting Nothing appears on the screen. Please check the power connection. Please check the video signal line connection. Please check and make sure that the auto lens switch is set to DC (VIDEO) when using a DC (VIDEO) lens.
  • Page 29 Problems Troubleshooting Color is not correct. Please check if the camera is facing directly into sunlight or fl uorescent light. Please check if an auto iris lens is being used. Please check the connection of the lens connector cable. L/L mode isn’t able to be selected. Have you connected your camera to DC power source? Connect it to AC power source.

  • Page 30: Specifications

    specifications SPECIFICATIONS Item SCB-1000NA SCB-1000ND SCB-1000PA SCB-1000PD SCB-1000PH Imaging Device 1/3” Super HAD CCD Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Scanning System 2:1 Interlace Internal / Internal / Internal / Synchronization Internal Internal...
  • Page 31 Item SCB-1000NA SCB-1000ND SCB-1000PA SCB-1000PD SCB-1000PH Gain Control Low / Middle / High / Off White Balance ATW / Manual / AWC (1,800K° ~ 10,500K°) Electronic Shutter 1/60 ~ 1/120,000 sec 1/50 ~ 1/120,000 sec Speed Mirror Off / On Environmental Operating Temperature /...

  • Page 32: Declaration Of Conformity

    Conformance to EN 55022 : 2006 EN 50130-4 : 2003 We, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s). Manufacturer SAMSUNG TECHWIN CO., LTD Legal Representative in Europe Signature Signature Full Name BONJENG GU...
  • Page 33 MEMO...
  • Page 34 MEMO...
  • Page 35 MEMO...
  • Page 36 MEMO...
  • Page 37 MEMO...
  • Page 38 MEMO...
  • Page 39 MEMO...
  • Page 40 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Park Tol Free : +1-877-213-1222, FAX : +1-310-632-2195 Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungtechwin.com...

Table of Contents