• IF THIS POWER SUPPLY IS USED AT 240V AC, A SUITABLE PLUG ADAPTER SHOULD BE USED. Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal WARNING guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own respon- sibility.
Page 3
IF THIS PRODUCT FAILS TO OPERATE NORMALLY, CONTACT THE NEAREST SERVICE CENTER. SUN, AS THIS MAY DAMAGE THE CCD IMAGE SENSOR. NEVER DISASSEMBLE OR MODIFY THIS PRODUCT IN ANY WAY. (SAMSUNG IS NOT LIABLE FOR PROBLEMS CAUSED BY UNAUTHORIZED MODIFICATIONS OR ATTEMPTED REPAIR.) APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
Page 4
Safety information Safety information 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Caution THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE Correct Disposal of This Product (Waste Electrical &...
Contents Important Safety Instructions Introduction Read these instructions. Keep these instructions. Features ..........10 Heed all warnings. PRODUCT & ACCESSORIES ..........11 Follow all instructions. Part Names and Functions ..........12 Do not use this apparatus near water. Clean only with dry cloth. Installation Do not block any ventilation openings.
Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain pixel unit to determine the optimal visibility. ❖ High Sensitivity • Adopted SONY Super-HAD PS CCD (SCB-3020)/Super-HAD IT CCD (SCB-2020) which enables super sensitive video acquisition. ❖ Low Illumination •...
Introduction Installation ❖ Rear CONNECTING THE REMOTE CONTROLLER To control the camera, a remote controller should be connected to. 1. EXT-IN 2. KEY_E 3. GND 4. DSPSTB 5. DSPSDI 6. DSPSDO POWER STATUS 7. DSPSCK POWER 1. L/L Pulse 1. L/L PULSE 8.
PRIVACY ZONE and more. • INTELLIGENCE The recommended adaptor specifi cation for SCB-3020/SCB-2020 is DC 12V / 500mA. Once you delete your settings, they will not be You can confi gure the settings of motion detection, restored even if you select QUIT in the menu.
AUTOx2 AUTOx4 AUTOx4 CUSTOM AUTO AUTO AUTO DAY/NIGHT NIGHT In the PROFILE menu, you can confi gure the following camera settings at once. BURST OFF <SCB-3020> DAY/NIGHT DAY/NIGHT CAMERA SET Menu STANDARD BACKLIGHT DAY/NIGHT GAMING Previous Menu Sub-menus MODE ATW2...
Page 11
How to use OSD Menu How to use OSD Menu <SCB-2020> CAMERA SET Menu CAMERA SET Menu STANDARD BACKLIGHT DAY/NIGHT GAMING STANDARD BACKLIGHT DAY/NIGHT GAMING Previous Menu Sub-menus Previous Menu Sub-menus NIGHT User setting User setting User setting BRIGHTNESS allowed allowed allowed IRIS...
[OFF, ON] IRIS [ELC] CAMERA SETUP The IRIS menu is used if you want to adjust the <SCB-2020> CAMERA ID <SCB-3020> intensity of radiation incoming to the camera. CAMERA SET ABCDEFGHIJKLMNOPQRSTUVWXYZ0 CAMERA SET 123456789 :?-+*()/ • ELC (Electronic Light Control)
Page 13
How to use OSD Menu How to use OSD Menu Note : Note : AGC FIX – If you use the VPS (Virtual Progressive Scan) function, the CCD – If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, LEVEL [00]----I---- LEVEL...
Page 14
How to use OSD Menu How to use OSD Menu ❖ DAY/NIGHT [DAY,NIGHT,AUTO] If you press the SETUP switch in item 1 or 2 of the AUTO WHITE BAL MASK menu, you will see a menu where you can BURST DAY/NIGHT •...
Page 15
How to use OSD Menu How to use OSD Menu ❖ ❖ Note : DIGITAL ZOOM [ON/OFF] DETAIL [0~3] Note : You can set the values of R-GAIN and B-GAIN only in AWC If more than one privacy zone is set and the PRIVACY SET is –...
How to use OSD Menu How to use OSD Menu ❖ INTELLIGENCE ADVANCED [OFF, FIXED/MOVED, FENCE] - How to set the line - How to set the area Detects a motion of an object and displays an image LINE AREA of any moving object before tracking the moving INTELLIGENCE PIXEL LEVEL...
How to use OSD Menu How to use OSD Menu ❖ ❖ Note : MASK AREA [1~4] ALARM OUT PRIVACY ZONE SETUP If you set the LINE of the FENCE to ON, PRIVACY 12 will not – Specify a detection exception area to mask. If you set a desired menu item to ON, the camera be available.
You can move the position of the overall area. STILL TIME DELAY TIME <SCB-3020> Select one from PRIVACY 1~12 and press the SETUP 1 By pressing the SETUP switch in <POSITION>, switch to confi rm your setting. You can specify a pixel...
Lens POSI/NEGA Zoom Ratio Fixed Focal Length 3.7mm Max. Aperture Ratio F2.0 V-SYNC Angular Field of View D : 80.81°, H : 64.65°, V : 48.49 ° VPS is only available with SCB-3020. 36 – High Resolution Compact ATM Camera...
Page 20
Specifi cations Specifi cations Items SCB-3020P SCB-2020P Items SCB-3020P SCB-2020P Operational On / Off On Screen Display Chinese Alarm 1 Output Camera Title Off / On ( Displayed 54 characters ) Communication Coaxial Control by SPC-300 (Option) Day & Night Color / B/W / Auto / Extern ENVIRONMENTAL Backlight Compensation...
Page 23
TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Tol Free : +1-877-213-1222, FAX : +1-310-632-2195 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungsecurity.com...