Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.
overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Page 5
Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected.
Page 6
overview Please read the following recommend safety precautions carefully. Do not place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. ...
CONTENTS Important Safety Instructions OVERVIEW Product Features What’s Included At a Glance Mounting the Lens INSTALLATION & Connecting with other Device CONNECTION Menu Configuration OPERATING YOUR CAMERA Menu Setup Specification APPENDIX Product Overview Troubleshooting English _7...
By adopting high-sensitive colour CMOS, the camera provides clear image quality under a severe low illumination condition of 0.017 Lux (with SENS-UP, x60). • SSNR3 (Samsung Super Noise Reduction) Function The high-performance WN2 DSP chip effectively removes low-light gain noise and afterimage to provide clear images even in dark environments.
WHAT’S INCLUDED Check if the main unit and all the following accessories are included in the product package. Appearance Item Name Quantity Description Camera User Manual Quick Guide C Mount Adapter Used to install the camera lens Auto Iris Lens Connector Used to test the camera connection to a Cable for the testing monitor portable display device...
Page 10
overview AT A GLANCE Front Side Item Description Camera Holder Used when you mount the camera onto the bracket by fixing the camera (Mount) Holes holder (mount) adaptor with the bracket. Auto Iris Lens Installed on the lens adaptor. (Optional) Auto Iris Lens Used to supply power and output signal to control the iris of the lens.
Page 11
Rear Side HD-SDI POWER C-Video 1 2 3 4 5 1 : GND 4 : RS-485+ 2 : EXT_D/N 5 : RS-485- DC 12V 3 : MD_OUT AC 24V Item Description HD-SDI Video Out BNC terminal for HD-SDI video signal output. terminal Power LED This lamp turns green when the proper power is applied to the camera.
Page 12
overview Item Description Power Port Used to plug the power cable. Used for earth-grounding. 1:GND Earth-grounding port for external signal. 2:EXT_D/N External signal input port for Day/Night mode setup. 3:MD_OUT Output port that signals when a motion is detected. I/O Port 4:RS-485+ Signal port for RS-485 communication.
installation & connection MOUNTING THE LENS Disconnect the power before proceeding. The C lens and CS lens are not included in the product package. If using a normal commercial lens, you may encounter out of focus when switching to BW mode . To prevent this, it is recommended to use the IR mega lens.
Page 14
installation & connection Connecting the Auto Iris Lens connector Insert the lens connector into the corresponding hole of the camera. Focusing Turn the lens left or right to control the zoom and focus the lens so that you can view a clear, sharp object.
CONNECTING WITH OTHER DEVICE HD-SDI Monitor HD-SDI POWER C-Video 1 2 3 4 5 Day/Night mode controller 1 : GND 4 : RS-485+ Test monitor for 2 : EXT_D/N 5 : RS-485- DC 12V 3 : MD_OUT AC 24V installation Motion detection output device Connecting to the monitor Connect the video out port of the camera to the video input port of the monitor.
installation & connection External Day/Night Switching Input Day/Night mode of the camera can be switched by signal from an external device. To use this function, <DAY/NIGHT> setting of the camera should be set to the <EXTERN>. (Page 27) Motion Detection Signal Out Upon a motion detection, the port outputs signal for an external device for display or operation.
Page 17
Camera Number Transfer Rate Communication Mode Return Data Default 9600 8-NONE-1 Not used When constructing a proprietary controller for direct camera control, apply Pelco-D or Samsung-Techwin protocol. Use only a DVR model that supports HD-SDI saving. English _17...
Operating Your Camera MENU CONFIGURATION MAIN SETUP LENS • DC • MANUAL • BRIGHTNESS • SHUTTER • AGC EXPOSURE • SENS-UP • RETURN • ATW • OUTDOOR • INDOOR WHITE BAL • AWC ➝ SET • MANUAL SSDR • OFF •...
MENU SETUP To configure the camera’s function settings, use the button on the rear side of the product. HD-SDI POWER C-Video 1 2 3 4 5 1 : GND 4 : RS-485+ 2 : EXT_D/N 5 : RS-485- DC 12V 3 : MD_OUT AC 24V •...
Page 20
Operating Your Camera 3. Use the Up/Down buttons to select a desired function. • Move the button right or left to display available values or settings. Set the desired setting value using the button. 4. To finish, select <EXIT> and press the SET button. ...
Page 21
EXPOSURE 1. When the SETUP menu screen is displayed, MAIN SETUP select <EXPOSURE> by using the Function Setup switch so that the arrow indicates 1. LENS ► 2. EXPOSURE <EXPOSURE> . 3. WHITE BAL 4. SSDR 2. Select a desired mode using the Function 5.
Page 22
Operating Your Camera • AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but the greater the noise. - OFF : Not being used - Low : Allows automatic gain control from 5.3dB to 20dB. - Medium : Allows automatic gain control from 5.3dB to 26dB.
Page 23
WHITE BAL (WHITE BALANCE) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, MAIN SETUP select <WHITE BAL>. by using the Function Setup switch so that the arrow indicates 1. LENS 2.
Page 24
Operating Your Camera SSDR (SAMSUNG SUPER DYNAMIC RANGE) SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas.
Page 25
BACKLIGHT This camera is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, by adopting a function of the proprietary WN2 DSP chip. 1. When the SETUP menu screen is displayed, MAIN SETUP select <BACKLIGHT>...
Page 26
Operating Your Camera SSNR3 This function reduces the background noise in a low luminance environment. 1. When the SETUP menu screen is displayed, MAIN SETUP select <SSNR3> by using the Function Setup switch so that the arrow indicates <SSNR3>. 1. LENS 2.
Page 27
• AUTO : The mode is switched to <COLOR> in AUTO SETUP a normal environment, but switches to <B/W> 1. COLOR B/W ► mode when ambient illumination is low. To set DWELL TIME 5 SEC up the switching time for AUTO mode, press DURATION SLOW the Function Setup switch.
Page 28
Operating Your Camera • CAM TITLE : If you enter a title, the title will CAM TITLE SETUP appear on the monitor. A A B C D E F G H I J K L M 1) If the SPECIAL menu screen is displayed, use N O P Q R S T U V W X Y Z the Function Setup switch so that the arrow a b c d e f g h i j k l m...
Page 29
• IMAGE ADJ : SPECIAL 1) When the SPECIAL menu screen is displayed, 1. CAM TITLE select <IMAGE ADJ> by using the Function ► 2. IMAGE ADJ Setup switch so that the arrow indicates 3. MOTION DET <IMAGE ADJ>. 4. PRIVACY 5.
Page 30
Operating Your Camera • MOTION DET : This product has a feature that MOTION DET allows you to observe movement of objects in ► 1. AREA AREA1 4 different areas on the screen, and the words 2. MODE <MOTION DET> appear on the screen when 3.
Page 31
2) Set up the mode using the Function Setup switch. - PROTOCOL : Select the communication PROTOCOL. (SAMSUNG-T, SAMSUNG-E, Pelco-D, Pelco-P, Bosch, Honeywell, Vicon, Panasonic, GE, AD) - CAM ID : Determines the camera's identification number (between 0 and 255).
TROUBLESHOOTING PROBLEM SOLUTION Check that the power cord and line connection between the camera and monitor are properly connected. When the camera’s HD-SDI BNC output is directly connected to the monitor’s BNC terminal: Make sure the monitor supports HD-SDI signal input. Nothing appears on the screen.
Page 36
Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
Page 40
SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...