Samsung SCB-1001P User Manual
Samsung SCB-1001P User Manual

Samsung SCB-1001P User Manual

High resolution camera

Advertisement

High Resolution Camera
User Manual
SCB-1001P/1001PD

Advertisement

Table of Contents
loading

Summary of Contents for Samsung SCB-1001P

  • Page 1 High Resolution Camera User Manual SCB-1001P/1001PD...
  • Page 2: User Manual

    Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
  • Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCB-1001 SERIES • PAL MODEL SCB-1001P/1001PD • POWER SOURCE SCB-1001P : DC12V,AC24V SCB-1001PD : DC12V...
  • Page 4: Safety Information

    Safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
  • Page 5: Caution

    If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
  • Page 6 To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents...
  • Page 7: Warning

    Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi...
  • Page 8: Table Of Contents

    Contents INTRODUCTION Features What’s included Component names and Functions CONNECTION Lens Connecting to Monitor Connecting to Power Using coaxial communications SETUP Menu Confi gration Menu Setup TROUBLESHOOTING Troubleshooting SPECIFICATIONS Specifi cations Dimension 8_ Contents...
  • Page 9: Introduction

    The built-in high sensitivity COLOR CCD produces a clear image. 0.1 Lux (50IRE, @F1.2)  ssNR (samsung super Noise Reduction) function The high-performance B2 DSP chip effectively removes low-light gain noise and afterimage to provide clear images even in dark environments.
  • Page 10 Introduction WHAT’S INCLUDED Check if the following items are included in the product package. High Resolution Camera High Resolution Camera Quick Set-up Guide SCB-1001P/1001PD User Manual SCB-1001P/1001PD Quick Set-up Guide User Manual SCB-1001 10_ Introduction...
  • Page 11 COMPONENT NAMES AND FUNCTIONS Front ❶ ➋ ➌ ❶ Tripod Mounting Bracket Screw Hole : Used to fix the Tripod Mounting Bracket . The camera have two hole at the top and bottom, please according to condition to install. 1/4"-20 UNC (20 THREAD) The screw sizes for this hole are as follows: L:4.5mm±0.2mm (ISO standard), or 0.197"...
  • Page 12 Introduction Back ➏ ➐ ➎ ➑ POWER VIDEO CLASS 2 ONLY <AC24V/DC12V(SCB-1001P)> ➏ ➐ ➎ ➑ POWER VIDEO <DC12V(SCB-1001PD)> ➎ Power input terminal : Connects to the power appropriate to each model. ➏ Video OUT Terminal : Sends video signal and connects to the video input terminal of the monitor.
  • Page 13: Connection

    Connection Lens The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens.  To use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is used.
  • Page 14 Connection 2. Turn the C-Mount lens clockwise to install it. C-Mount Adapter 3. Set focus of camera using Back Focus Control Lever of camera side after combining C-Mount lens.  Note that C-Mount adaptor is not supplied with camera. When Install a CS-Mount lens Remove the protective cover from the front of the camera, and turn the CS-Mount lens clockwise to install it.
  • Page 15: Specifications 2

    You can connect power as shown in the following figure. For AC / DC power SCB-1001P • Since SCB-1001P the power specification supports both AC and DC, connect AC 24V, 500mA Adaptor or DC 12V, 500mA POWER Adaptor.
  • Page 16: Connection 1

    Standard voltage for camera operation : SCB-1001P : DC 12V±10%, AC 24V±10% SCB-1001PD : DC 12V±10% There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
  • Page 17 CAMERA CONTROLLER MENU/ENTER OSD KEY UP KEY JOYSTICK UP DOWN DOWN KEY JOYSTICK DOWN LEFT LEFT KEY JOYSTICK LEFT RIGHT RIGHT KEY JOYSTICK RIGHT ALARM NETWORK BACKUP ZOOM FREEZE BACKUP SEARCH TELE WIDE VIEW PRESET MODE AUDIO ALRAM MENU DVD RECORDER OPEN/CLOSE RETURN - Video Cable...
  • Page 18: Setup

    Setup MENU CONFIGRATION mAIN seTUp leNs ● ● MANUAL ● ● ● BRIGHTNESS SHUTTER expOsURe ● RETURN defOG ● ● ● AUTO MANUAL OUTDOOR INDOOR ● ● ● WhITe bAl AWC → SET ● MANUAL ● bACKlIGhT ● ● ● USER BLC ●...
  • Page 19: Setup 18

    MAIN SETUP 1.LENS Select the function using Change the status 2.EXPOSURE the Function Setup switch. using the Function Setup switch. DEFOG AUTO WHITE BAL BACKLIGHT SSNR DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE Select a desired function using the Function Setup switch. Place the cursor over a desired item.
  • Page 20 Setup EXPOSURE When the SETUP menu screen is displayed, MAIN SETUP select EXPOSURE by using the Function 1.LENS Setup switch so that the arrow indicates 2.EXPOSURE 'EXPOSURE'. 3.DEFOG AUTO Select a desired mode using the Function Setup switch. BRIGHTNESS : Adjusts the video brightness. EXPOSURE SETUP SHUTTER : You can select either auto or 1.BRIGHTNESS...
  • Page 21 Manual : The camera will adjust the definition of the image according to user's preferences  (low, middle, high). through the defogging level  OFF: Turn off Defogging function.  Defogging and SSDR function cannot be run simultaneously. When defogging function is set to AUTO or MANUAL mode, SSDR function is not available.
  • Page 22 Setup BACKLIGHT The SCB-1001 is designed to deliver a distinctive subject and background at the same time, even when the subject is backlight, by adopting a function of the proprietary B2 DSP chip. When the SETUP menu screen is displayed, MAIN SETUP select ‘BACKLIGHT’...
  • Page 23 SSNR This function reduces the background noise in a low luminance environment. When the SETUP menu screen is displayed, SSNR select 'SSNR' by using the Function Setup ▶ LEVEL IIII*IIIIIIIIIIIIIIIIIIIIII switch so that the arrow indicates 'SSNR'. RETURN Select a desired mode using the Function Setup switch.
  • Page 24 Setup SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. 2. Select a desired mode using the Function Setup switch.  monitor : Please change the settings value of LCD MONITOR video appropriate to your monitor.
  • Page 25 Adjust this value appropriately depending on the sharpness of the picture.  COaX : COAX option is set to "On" will specify the use of coaxial communication.  SSDR(samsung super dynamic Range) SSDR illuminates darker areas of an image while...
  • Page 26 Setup SSDR ON SSDR OFF  LANGUAGE : You can select the menu language according to your requirements.  RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu. EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. ...
  • Page 27: Troubleshooting

    Troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. SOLUTION PROBLEM Check that the power cord and line connection between the Nothing appears on the screen.
  • Page 28: Specifications

    Specifications SPECIFICATIONS Video 1/3’’ Super HAD CCD II (Double Scan) Imaging Device x 596 Total Pixels x 582 Effective Pixels Scanning System 2:1 Interlace Internal / Line Lock Synchronization Internal Frequency H: 15.625KHz / V: 50.00Hz Horizontal Resolution Color : 600 TV lines, B/W : 650 TV lines 0.1 Lux (50IRE, @ F1.2) (AGC : High) Min.
  • Page 29 Reverse OFF / H-REV Communication Coaxial Control ( SPC-300 Compatible ) Coax : Pelco-C ( Coaxitron ) Protocol Environmental Operating Temperature -10°C ~ +55°C (+14°F ~ +131°F) / Less than 90% RH / Humidity Electrical AC 24V ± 10% , DC 12V±10% DC 12V±10% Input Voltage 2.3W...
  • Page 30 Specifications DIMENSION Unit: mm 30_ Specifi cations...
  • Page 31 MEMO...
  • Page 32 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungcctvusa.com...

This manual is also suitable for:

Scb-1001pd

Table of Contents