Table of Contents
Advertisement
eXpoSure
1. When the SETUP menu screen is displayed,
select <eXpoSure> by using the Function
Setup switch so that the arrow indicates
<eXpoSure> .
2. Select a desired mode using the Function
Setup switch.
• BriGHtneSS : Adjust the screen brightness.
• SHutter : You can select the shutter.
- – – – : 1/30sec
- A.FLK : Select this when you experience
picture flicker, this happen when there is a
clash with the installed lighting frequency.
- ESC : Select this to control the shutter speed
automatically. If ESC is selected, the shutter
speed is automatically controlled depending on
the ambient illumination of the subject.
- MANUAL : You can control shutter speed manually (1/30sec ~ 1/16,000sec)
When you use a DC lens, set the shutter mode to --- if color rolling occurs.
`
J
Carefully position the camera when installing, since produced image quality might be poor if
`
framing a bright light source while the shutter mode of EXPOSURE is set to AUTO.
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
`
• aGc(auto Gain controL) : The higher the gain level, the brighter the screen -
but the greater the noise.
- OFF : Not being used
- Low : Allows automatic gain control from 5.3dB to 20dB.
- Medium : Allows automatic gain control from 5.3dB to 26dB.
- High : Allows automatic gain control from 5.3dB to 32dB.
• SenS-up : When it is night or dark, the camera automatically detects the light level
and maintains a clear picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
MAIN SETUP
1. LENS
2. EXPOSURE
►
3. WHITE BAL
SIMPLE FOCUS
4.
5. BACKLIGHT
6. SSNR3
7. DAY/NIGHT
8. SPECIAL
9. EXIT
EXPOSURE SETUP
.... ....
1. BRIGHTNESS
2. SHUTTER
►
3. AGC
4. SENS-UP
DEFOG
5.
6. SSDR
7.
RETURN
English _21
DC
ATW
INIT
SET
➝
OFF
ON
AUTO
.... .... 50
*
ESC
HIGH
AUTO
---
ON
Hide quick links:
Advertisement
Table of Contents
