Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
Page 3
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCB-2004 SERIES • NTSC MODEL SCB-2004N / 2004ND • PAL MODEL SCB-2004P/2004PD • POWER SOURCE...
Safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
Page 5
If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
Page 6
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents...
Page 7
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi...
Contents INTRODUCTION Features What’s included Component names and Functions CONNECTION Lens Connecting to Monitor Connecting to Power Using coaxial communications SETUP Menu Confi gration Menu Setup TROUBLESHOOTING Troubleshooting SPECIFICATIONS Specifi cations Dimension 8_ Contents...
Page 9
The camera is able to recognize the concerntration of fog in the image, and automatically defog, correct image of the bad weather such as fog, rain, mist, fumes, etc to make it clear. ssdR (samsung super dynamic Range) For images with high contrast between bright and dark areas from difficult lighting conditions such as backlighting, this camera selectively illuminates darker areas while retaining the same light level for brighter areas to even out the overall brightness.
Introduction WHAT’S INCLUDED Check if the following items are included in the product package. High Resolution Camera Quick Manual SCB-2004 Quick Manual SCB-2004 10_ Introduction...
COMPONENT NAMES AND FUNCTIONS Front ❶ ➋ ➌ ❶ Tripod Mounting Bracket Screw Hole : Used to fix the Tripod Mounting Bracket . * The camera have two hole at the top and bottom, please according to condition to install. 1/4"-20 UNC (20 THREAD) The screw sizes for this hole are as follows: L:4.5mm±0.2mm (ISO standard),...
Page 12
Introduction Back ➏ ➐ ➎ ➑ POWER VIDEO ➏ ➐ ➎ ➑ POWER VIDEO CLASS 2 ONLY ➎ Power input terminal : Connects to the power appropriate to each model. ➏ Video OUT Terminal : Sends video signal and connects to the video input terminal of the monitor.
Page 13
Connection Lens The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. To use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is used.
Page 14
Connection 2. Turn the C-Mount lens clockwise to install it. C-Mount Adapter 3. Set focus of camera using Back Focus Control Lever of camera side after combining C-Mount lens. Note that C-Mount adaptor is not supplied with camera. When Install a CS-Mount lens Remove the protective cover from the front of the camera, and turn the CS-Mount lens clockwise to install it.
You can connect power as shown in the following figure. For AC / DC power SCB-2004 • Since SCB-2004 the power specification supports both AC and DC, connect AC 24V, 500mA Adaptor or DC 12V, 500mA POWER Adaptor.
Connection For DC power SCB-2004D • Since SCB-2004D the power specification support DC, connect DC 12V, 500mA POWER Adaptor. VIDEO When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24(0.22mm #22(0.33mm #20(0.52mm #18(0.83mm Resistance (Ω/m) 0.078 0.050 0.030...
Page 17
CAMERA CONTROLLER MENU/ENTER OSD KEY UP KEY JOYSTICK UP DOWN DOWN KEY JOYSTICK DOWN LEFT LEFT KEY JOYSTICK LEFT RIGHT RIGHT KEY JOYSTICK RIGHT ALARM NETWORK BACKUP ZOOM FREEZE BACKUP SEARCH TELE WIDE VIEW PRESET MODE AUDIO ALRAM MENU DVD RECORDER OPEN/CLOSE RETURN - Video Cable...
Setup MENU CONFIGRATION mAIN seTUp leNs ● ● MANUAL ● ● ● BRIGHTNESS SHUTTER expOsURe ● ● SENS-UP RETURN defOG ● ● ● AUTO MANUAL OUTDOOR INDOOR ● ● ● WhITe bAl AWC → SET MANUAL ● ● bACKlIGhT ● ●...
Page 19
MAIN SETUP 1.LENS Select the function using Change the status 2.EXPOSURE the Function Setup switch. using the Function Setup switch. DEFOG AUTO WHITE BAL BACKLIGHT SSNR3 DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE Select a desired function using the Function Setup switch. Place the cursor over a desired item.
Page 20
Setup EXPOSURE 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Function Setup switch so that the arrow indicates 'EXPOSURE'. Select a desired mode using the Function EXPOSURE SETUP Setup switch. 1.BRIGHTNESS IIIIIIIII IIIIIIII BRIGHTNESS : Adjusts the video brightness. ---...
Page 21
WHITE BAL (WHITE BALANCE) Use the White Balance function to adjust the screen color. When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup switch so that the arrow indicates ‘White Bal’. Select a desired mode using the Function Setup switch. ※...
Page 22
Setup 2. Select a desired mode using the Function Setup switch depending on the camera purpose. UseR blC : Enables a user to directly BLC SETUP select a desired area from a ▶ 1.LEVEL MIDDLE picture, and to view the area 2.TOP IIIII ...
Page 23
DAY/ NIGHT You can display pictures in color or black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up and Down buttons so that the arrow indicates ‘DAY/NIGHT’. 2. Select a desired mode using the Left and Right buttons according to the picture display you want.
Page 24
Setup monitor : Please change the settings value LCD MONITOR of video appropriate to your monitor. ▶ GAMMA 0.55 LCD: Please select this menu item when PED LEVEL using an LCD monitor. You can change III*IIIIIIIIIIIIIIIIII the gamma, PED level and color gain in COLOR GAIN IIIIIIIII*IIIIIIIIIIII the sub menus.
Page 25
5 Enter a title, move the cursor to ’POS’ and press FRONT DOOR the Function Setup switch. The entered title appears on the screen. Select the position to display the title on the screen by using the Function Setup switch and press.
Page 26
When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode. COaX : COAX option is set to "On" will specify the use of coaxial communication. SSDR(samsung super dynamic Range) SSDR illuminates darker areas of an image while SSDR SETUP retaining the same light level for brighter areas to ▶...
Page 27
SSDR ON SSDR OFF RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu. EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. sAVe : Save the current settings and exit the MAIN SETUP menu. ...
Troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. SOLUTION PROBLEM ▶ Check that the power cord and line connection between the Nothing appears on the screen.
Specifications SPECIFICATIONS Video 1/3’’ Super HAD CCD II (Double Scan) Imaging Device Total Pixels 1020(H) x 508(V) 1020(H) x 596(V) Effective Pixels 976(H) x 494(V) 976(H) x 582(V) Scanning System 2:1 Interlace Internal Internal / Line Lock Internal Internal / Line Lock Synchronization Frequency H : 15.734KHz / V : 59.94Hz...
Page 30
Specifications Gain Control Off / Low / Middle / High 1/60 ~ 1/120,000 1/50 ~ 1/120,000 Electronic Shutter Speed → ATW / Outdoor / Indoor / Manual / AWC SET (1,800K° ~ 10,500K°) White Balance Reverse OFF / H-REV Communication Coaxial Control ( SPC-300 Compatible ) Protocol Coax : Pelco-C ( Coaxitron )
Page 32
SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungcctvusa.com...