Page 1
Compact High Resolution SCB-3021 ATM Camera SCB-3020 User Manual SCB-2020...
Page 2
Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own respon- sibility.
Page 3
Safety information CAUTION RISK OF ELECTRIC SHOCK.DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
Page 4
IN SUCH A CONDITION MAY CAUSE FIRE OR ELECTRIC SHOCK. IF THIS PRODUCT FAILS TO OPERATE NORMALLY, CONTACT THE NEAREST SERVICE CENTER. NEVER DISASSEMBLE OR MODIFY THIS PRODUCT IN ANY WAY. (SAMSUNG IS NOT LIABLE FOR PROBLEMS CAUSED BY UNAUTHORIZED MODIFICATIONS OR ATTEMPTED REPAIR.) WHEN CLEANING, DO NOT SPRAY WATER DIRECTLY ONTO PARTS OF THE PRODUCT.
Page 5
Safety information CAUTION DO NOT DROP OBJECTS ON THE PRODUCT OR APPLY STRONG BLOWS TO IT. KEEP AWAY FROM A LOCATION SUBJECT TO EXCESSIVE VIBRATION OR MAGNETIC INTERFERENCE. DO NOT INSTALL IN A LOCATION SUBJECT TO HIGH TEMPERATURE (OVER 50°), LOW TEMPERATURE (BELOW -10°), OR HIGH HUMIDITY.
Page 6
Safety information 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Caution THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
Page 7
Safety information Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
Page 8
Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be placed on the apparatus Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin’s will to create environment-friendly products,...
Contents Introduction Features ..........10 Product & Accessories ..........11 Part Names and Functions ..........12 Installation Connecting the Remote Controller ..........15 Connecting to Monitor ..........16 Connecting to Power ..........16 How to use OSD Menu Using Icons in the Menu ..........17 Main Menu ..........
Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain pixel unit to determine the optimal visibility. ❖ High Sensitivity • Adopted SONY Super-HAD PS CCD (SCB-3021/3020)/Super-HAD IT CCD (SCB-2020) which enables super sensitive video acquisition. ❖ Low Illumination •...
In installation or repair, this helps you control the communication controller (optional) without additional cabling. PRODUCT & ACCESSORIES ❖ Product & Accessories • Main Product • Accessories High Resolution Compact ATM Camera SCB-3021 SCB-3020 User Manual SCB-2020 8PIN Connector Cable Tie (1EA) Screw (2EA) User Manual...
Introduction PART NAMES AND FUNCTIONS ❖ Front Lens SCB-3021 : 4.3mm (F2.0) SCB-3020/SCB-2020 : 3.7mm (F2.0) Bracket Used to fi x the product on a wall or ceiling. Video Out Outputs camera’s video signal, which is to be connected to a monitor’s Video In. The port can be used for menu control if connected with a controller.
Installation CONNECTING THE REMOTE CONTROLLER To control the camera, a remote controller should be connected to. POWER STATUS POWER ADDRESS (X)100 (X)10 (X)1 CABLE COMPENSATION 2 3 4 5 6 7 8 TERMINATION PROTOCOL REMOTE CONTROLLER SPC-300 <CONTROLLER> Connect the camera’s video out port to the CONTROLLER’s VIDEO IN. Connect the CONTROLLER’s VIDEO OUT port to a monitor’s video in.
Monitor CONNECTING TO POWER Connect the adaptor to the power input terminal as shown in the fi gure below. The recommended adaptor specifi cation for SCB-3021/3020/2020 is DC 12V / 500mA. POWER VIDEO 16 – High Resolution Compact ATM Camera...
How to use OSD Menu USING ICONS IN THE MENU MAIN MENU • (EXIT) MAIN MENU Exits the menu setting. PROFILE CAMERA SET Before you exits the menu setting, select SAVE to INTELLIGENCE save your settings, or select QUIT to cancel. PRIVACY ZONE OTHER SET •...
How to use OSD Menu PROFILE PROFILE STANDARD BACKLIGHT DAY/NIGHT GAMING CUSTOM In the PROFILE menu, you can confi gure the following camera settings at once. <SCB-3021/3020> CAMERA SET Menu STANDARD BACKLIGHT DAY/NIGHT GAMING Previous Menu Sub-menus LEVEL 0 BACKLIGHT OFF...
Page 19
How to use OSD Menu CAMERA SET Menu STANDARD BACKLIGHT DAY/NIGHT GAMING Previous Menu Sub-menus SHUTTER (OFF)--- (OFF)--- (OFF)--- (OFF)--- (OFF)--- SENS-UP AUTOx2 AUTOx2 AUTOx2 AUTOx4 AUTOx4 AUTO AUTO AUTO DAY/NIGHT NIGHT BURST OFF DAY/NIGHT DAY/NIGHT MODE ATW2 ATW1 ATW2 ATW1 ATW1 RED 0...
Page 20
How to use OSD Menu <SCB-2020> CAMERA SET Menu STANDARD BACKLIGHT DAY/NIGHT GAMING Previous Menu Sub-menus IRIS LEVEL 0 BACKLIGHT OFF MOTION (F.FAST)--- (F.FAST)--- F.FAST (F.FAST)--- SLOW SHUTTER (OFF)--- (OFF)--- (OFF)--- (OFF)--- (OFF)--- SENS-UP AUTOx2 AUTOx2 AUTOx2 AUTOx4 AUTOx4 DAY/NIGHT AUTO AUTO AUTO...
Page 21
How to use OSD Menu CAMERA SET Menu STANDARD BACKLIGHT DAY/NIGHT GAMING Previous Menu Sub-menus NIGHT User setting User setting User setting BRIGHTNESS allowed allowed allowed MODE OFF ATW2 ATW2 WHITE BAL User setting User setting User setting allowed allowed allowed User setting User setting...
How to use OSD Menu CAMERA SETUP <SCB-2020> <SCB-3021/3020> CAMERA SET CAMERA SET CAMERA ID CAMERA ID IRIS MOTION F.FAST IRIS MOTION F.FAST SHUTTER (OFF)--- SENS-UP AUTO X2 SHUTTER (OFF)--- FLICKERLESS (OFF)--- SENS-UP AUTO X2 FLICKERLESS (OFF)--- DAY/NIGHT WHITE BAL...
Page 23
How to use OSD Menu ❖ ❖ CAMERA ID [OFF, ON] IRIS [ELC] The IRIS menu is used if you want to adjust the CAMERA ID intensity of radiation incoming to the camera. ABCDEFGHIJKLMNOPQRSTUVWXYZ0 • ELC (Electronic Light Control) 123456789 :?-+*()/ ①...
Page 24
How to use OSD Menu Note : – If you use the VPS (Virtual Progressive Scan) function, the CCD LEVEL [00]----I---- reads differently so you can not use WDR simultaneously. BACKLIGHT If you set VPS to ON, WDR will be automatically set to OFF. AREA USER <SIZE>...
Page 25
How to use OSD Menu Note : AGC FIX – If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, LEVEL [01] the MOTION menu will be deactivated. ❖ [OFF,LOW,MID,HIGH, USER(1~16)] You can confi gure the DNR (Digital Noise Reduction) related settings.
Page 26
How to use OSD Menu ❖ XDR (eXtended Dynamic Range) AUTO [OFF, LOW, MID, HIGH] BURST DAY NIGHT Actively controls the gamma compensation in the BRIGHTNESS way it operates the ambient luminance contrast in a DWELL TIME 2SEC NIGHT DAY certain pixel unit to determine the optimal visibility.
Page 27
How to use OSD Menu If you press the SETUP switch in item 1 or 2 of the WHITE BAL MASK menu, you will see a menu where you can DAY/NIGHT specify an area to mask. MODE [00]----I---- MASK AREA BLUE [00]----I---- <SIZE>...
Page 28
How to use OSD Menu ❖ Note : DIGITAL ZOOM [ON/OFF] You can set the values of R-GAIN and B-GAIN only in AWC – You can set the digital zoom factor and position. mode. If you press the SETUP switch with the DIGITAL ZOOM function set to ON, you will see the If AGC is set to OFF or FIX, you can not access the NIGHT –...
Page 29
How to use OSD Menu ❖ ❖ DETAIL [0~3] AGC COLOR SUP [LOW , MID, HIGH] Controls the horizontal or vertical distinction. Adjust the color scheme according to the AGC value. ❖ V-SYNC [INT, LINE] ❖ REVERSE [OFF, H, V, H/V] Select the vertical sync mode for INT or LINE.
How to use OSD Menu ❖ INTELLIGENCE ADVANCED [OFF, FIXED/MOVED, FENCE] Detects a motion of an object and displays an image of any moving object before tracking the moving INTELLIGENCE route. MOTION ADVANCED • FENCE MASK AREA 2 3 4 DISPLAY This is to detect if a moving object passes through SENSITIVITY...
Page 31
How to use OSD Menu - How to set the line - How to set the area LINE AREA PIXEL LEVEL PIXEL LEVEL <SIZE> <POINT> <LOCATION> DIRECTION 1 If you press the SETUP switch with the LINE 1 If you press the SETUP switch with the AREA option set to ON, you can specify the position option set to ON, you can specify the position and detection direction of the line.
Page 32
How to use OSD Menu ❖ Note : MASK AREA [1~4] If you set the LINE of the FENCE to ON, PRIVACY 12 will not – Specify a detection exception area to mask. be available. Select a mask number and specify the size and Functions of FENCE, PIP, DIS and DIGITAL ZOOM (if the position.
How to use OSD Menu ❖ ALARM OUT PRIVACY ZONE SETUP If you set a desired menu item to ON, the camera will sound an alert if it detect the appropriate PRIVACY ZONE motion. ALARM OUT PRIVACY SET MOTION STYLE MOSAIC1 FIXED/MOVED FENCE...
Page 34
How to use OSD Menu - How to set the position Use the switch to select one from PRIVACY 1 through 12. You can move the position of the overall area. Select one from PRIVACY 1~12 and press the SETUP 1 By pressing the SETUP switch in <POSITION>, switch to confi...
How to use OSD Menu OTHER SET EXTERNAL TRG STILL TIME DELAY TIME <SCB-3021/3020> OTHER SET LANGUAGE ENGLISH EXTERNAL TRG (OFF)--- FACTORY DEFAULTS OSD COLOR You can set the STILL TIME to 1~4 seconds. If DELAY TIME is set to FIX, the DELAY TIME will be set in sync with the STILL TIME if set to USER, the DELAY TIME will be set to your setting.
You can view the system information including the SENS-UP AUTO x2 serial number and camera version. FLICKERLESS (OFF) DAY/NIGHT DIGITAL ZOOM DETAIL AGC COLOR SUP REVERSE POSI/NEGA V-SYNC VPS is only available with SCB-3021/3020. 36 – High Resolution Compact ATM Camera...
Color : 0.45 Lux (50IRE@F2.0, Sens-up 2x) Color : 0.15 Lux (50IRE@F2.0, Sens-up 2x) S / N (Y signal) 52dB (AGC off, Weight on) Video Output CVBS : 1.0 Vp-p / 75Ω composite Lens Type SCB-3021 : 4.3mm Focal Length (Zoom Ratio) 3.7mm SCB-3020 : 3.7mm Max. Aperture Ratio F2.0...
Page 38
Items SCB-2020N SCB-2020P SCB-3020N SCB-3020P SCB-3020/SCB-2020 ( D : 80.81°, H : 64.65°, V : 48.49 °) Angular Field of View SCB-3021 (D : 70.9°, H : 55.3°, V : 40.9°) Min. Object Distance 0.4m Operational Multi-language Multi-language Support Support...
Page 48
SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungcctvusa.com...