Thermal Night Vision Camera SCB-9050/9051 User Guide Before installing and operating this product, please read this manual thoroughly. ENGLISH...
Page 2
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Contents Features Features The SCB-9050/9051 Thermal Night Vision Camera is a contactless monitoring device • ………………………………………………………………………… 5 capable of measuring the surface temperatures of all target areas, and displaying the • Warnings & Cautions ……………………………………………………… 6 resulting data via temperature distribution images (thermal images).
* This product is an auxiliary device that is used as part of a monitoring system. Samsung Techwin will not be held liable in cases when personal or property damage is caused due to theft, fire, or other unavoidable occurrences.
Do not drop the product, or subject it Do not touch the camera lens with to strong impacts or vibrations. your hands or fingers. SCB-9050/9051, camera sun shield Screws for fastening camera (4×M3XL12) L-type hexagon wrenches (3: 1.5 mm/2.5 mm/3.0 mm) Bolts for fastening camera (2)
Names of external camera parts Assembly/Adjustment Methods Ø104 ❶ SCB-9050 Video signal/communications (RS485) cable Power cable (AC 24 V, 50/60 Hz) Lens (SCB-9050 : 14mm, SCB-9051 : 50mm) Support platform for fastening camera Ø104 Names of internal camera parts Front Rear ❶...
The sensor will not operate properly immediately after the power is turned on, or when switching between HIGH and LOW ranges. As a result, thermal images will not display consistently for several seconds. Menu controls can be used to save values to be applied at subsequent start-up of the SCB-9050/9051. (If values are not saved, then the last saved settings will be applied.) Thermal Night Vision Camera User Guide Thermal Night Vision Camera...
After thermal images appear, the camera will begin to monitor its range of coverage. 1. D o not adjust the focus if there is no particular point of focus to monitor. 2. For an in-depth explanation of the controls used with the SCB-9050/9051, refer to the section detailing how the camera is operated on page 16.
Page 9
Interface ■Rear Terminal Placement ■Connector specifications and signals ① <Function Chart> ④ ② Function Explanation Notes Operates the RS485 I/F. ③ ⑤ Because full-duplex communication Communication terminator is supported, this function is used settings: to update F/W. - Default value: ON RS485 I/F Standard users should utilize the - If multiple cameras are installed :...
Operating the Camera Function Menu Configuration Main Menu Function Explanation LEVEL BRIGHTNESS AUTO MANUAL RETURN BRIGHTNESS AUTO / MANUAL (level ranging from 1-10) LEVEL CONTRAST AUTO / MANUAL (level ranging from 1-10) CONTRAST AUTO MANUAL RETURN RANGE AUTO / L/H RANGE AUTO HIGH...
Operating the Camera Function Settings Methods BRIGHTNESS Function settings may be adjusted using the internal switches after removing the rear cover. (Refer to “5. Interface” for directions on how to remove the rear cover.) MAIN SETUP UP button : Move the menu cursor up. 1. BRIGHTNESS AUTO RIGHT button : Increase (+) the settings value of the selected item. 2. CONTRAST MANUAL DOWN Key : Move the menu cursor down. LEFT button : Decrease (-) the settings value of the selected item. 1. P ress the SET button while the cursor is aligned with “1. SET button : I f a “ ” icon is displayed: Move to a screen where you can select settings BRIGHTNESS” to display the BRIGHTNESS sub menu shown BRIGHTNESS values (move down a level)
Operating the Camera Press the LEFT button or RIGHT button while the cursor is aligned with “MANUAL” to adjust the NUC MODE (Calibration Mode) CONTRAST over ten different levels: 1 ⇒ 2 ⇒ 3 ⇒ 4 ⇒ 5 ⇒ 6 ⇒ 7 ⇒ 8 ⇒ 9 ⇒ 10 ⇒1. Select NUC(Non-uniformity Correction) is a menu calibrating all pixel's characteristics to get better image. “2. RETURN” to confirm the current setting and go back to the MAIN SETUP menu screen. (Default Select an NUC operation mode. If you choose “MANUAL”, the user is to perform NUC manually, value: 6) instead of having the device conduct calibration automatically.
Operating the Camera COLOR : … 3D-DNR (Noise Reduction) : Use this option to set the color of images. When "COLOR1" is selected, high temperature IMAGE ADJ P ress the LEFT button or the RIGHT button to limit the ▶ 1.3D-DNR areas will be shown in red, while low temperature areas will be displayed in blue. If COLOR2 amount of noise produced.
9600 Notes 3.UART MODE 8-E-1 COMM ADJ” in the SPECIAL SETUP menu to display the 4.RET PKT following sub menu. • Don't use SCB-9050/9051 to detect anything. Measurement error is ±15°C for objects 5.DISPLAY CAM ID 6.RETURN that have 0~100°C. … - CAMERA ID (Camera ID Settings) : Use this option to adjust CAMERA ID settings.
• If the camera is operating abnormally, or its surface is very hot, causing black lines to appear onscreen : - Verify that the power voltage received by the camera conforms to the proper rating. Also, confirm SCB-9050 whether performance is affected by the time of day. • If RS485 communications cannot be carried out : - Verify the polarity of the RS485 communications terminal and the arrangement of the cables.
MEMO DECLARATION OF CONFORMITY Application of Council Directive(s) 2004 / 108 / EC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Equipment Type/Environment Thermal Night Vision Camera...
Page 18
MEMO MEMO Thermal Night Vision Camera User Guide Thermal Night Vision Camera User Guide...
Page 19
SAMSUNG TECHWIN EUROPE LTD. • • 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungtechwin.com...