Samsung SCB-6001 User Manual
Samsung SCB-6001 User Manual

Samsung SCB-6001 User Manual

Hd-sdi camera
Hide thumbs Also See for SCB-6001:

Advertisement

HD-SDI CAMERA
User Manual
SCB-6001

Advertisement

Table of Contents
loading

Summary of Contents for Samsung SCB-6001

  • Page 1 HD-SDI CAMERA User Manual SCB-6001...
  • Page 2: User Manual

    Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
  • Page 3: Important Safety Instructions

    overview important Safety inStructionS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
  • Page 4 overview warninG TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Page 5 class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected.
  • Page 6 overview Please read the following recommend safety precautions carefully. y Do not place this apparatus on an uneven surface. y Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. y Do not place this apparatus near conductive material.
  • Page 7: Table Of Contents

    contentS oveRvIeW Important Safety Instructions Product Features What’s Included At a Glance InSTALLATIon & Mounting the Lens ConneCTIon Connecting with other Device opeRATIng YouR CAmeRA Menu Configuration Menu Setup AppenDIx Troubleshooting Specification Product Overview English _7...
  • Page 8: Overview

    By adopting high-sensitive colour CMOS, the camera provides clear image quality under a severe low illumination condition of 0.017 Lux (with SENS-UP, 60x). • SSnr3 (Samsung Super noise reduction) function The high-performance WN2 DSP chip effectively removes low-light gain noise and afterimage to provide clear images even in dark environments.
  • Page 9 wHat’S incLuDeD Check if the main unit and all the following accessories are included in the product package. Appearance Item Name Quantity Description Camera Quick Manual C Mount Adapter Used to install the camera lens Auto Iris Lens Connector Used to test the camera connection to a Cable for the testing monitor portable display device English _9...
  • Page 10: Front Side

    overview at a GLance front Side Item Description Used to fix the camera on a bracket or mounting bracket. The screw size : use this screw to fix the mounting Mounting Bracket bracket . Screw Hole 1/4” -20UNC(20THREAD) L : 4.5mm±0.2mm (ISO Standard), or 0.197”...
  • Page 11: Rear Side

    rear Side HD-SDI VIDEO POWER 1 : GND 2 : EXT_D/N 3 : MD_OUT 4 : RS_485+ 5 : RS_485- Item Description HD-SDI Video Out BNC terminal for HD-SDI video signal output. terminal The switch is used for setting and adjusting the camera’s functions and properties.
  • Page 12 overview Item Description Power LED This lamp turns green when the proper power is applied to the camera. Used for earth-grounding. Power Port Used to plug the power cable. 1:GND Earth-grounding port for external signal. 2:EXT_D/N External signal input port for Day/Night mode setup. I/O Port 3:MD_OUT Output port that signals when a motion is detected.
  • Page 13: Mounting The Lens

    installation & connection mountinG tHe LenS Disconnect the power before proceeding. The C lens and CS lens are not included in the product package. If using a normal commercial lens, you may encounter out of focus when switching to BW mode . To prevent this, it is recommended to use the IR mega lens.
  • Page 14: Connecting The Auto Iris Lens Connector

    installation & connection connecting the auto iris Lens connector Insert the lens connector into the corresponding hole of the camera. focusing Turn the lens left or right to control the zoom and focus the lens so that you can view a clear, sharp object.
  • Page 15: Connecting With Other Device

    connectinG witH otHer Device HD-SDI Monitor HD-SDI HD-SDI VIDEO POWER Day/Night mode 1 : GND 2 : EXT_D/N Test monitor for 3 : MD_OUT controller 4 : RS_485+ installation 5 : RS_485- Motion detection output device connecting to the monitor Connect the video out port of the camera to the video input port of the monitor.
  • Page 16: Installation & Connection

    installation & connection external Day/night Switching input Day/Night mode of the camera can be switched by signal from an external device. To use this function, <DAY/NIGHT> setting of the camera should be set to the <EXTERN>. (Page 27) motion Detection Signal out Upon a motion detection, the port outputs signal for an external device for display or operation.
  • Page 17 Default rS-485 communication settings Item CAM ID BAUD RATE UART MODE RET PKT Default 9600 8-N-1 ENABLE When constructing a proprietary controller for direct camera control, apply Pelco-D or Samsung- Techwin protocol. Use only a DVR model that supports HD-SDI saving. English _17...
  • Page 18: Operating Your Camera

    Operating Your Camera menu confiGuration MAIN SETUP • DC • MANUAL • P-IRIS LENS • BRIGHTNESS • SHUTTER • AGC EXPOSURE SSDR • SENS-UP • DEFOG • • RETURN MANUAL AWC ➝ SET • ATW • • WHITE BAL • • OUTDOOR INDOOR • INIT ➝ SET • FOCUSING ➝ SET SIMPLE FOCUS • OFF • BLC • HLC...
  • Page 19: Menu Setup

    menu Setup To configure the camera’s function settings, use the button on the rear side of the product. HD-SDI VIDEO POWER 1 : GND 2 : EXT_D/N 3 : MD_OUT 4 : RS_485+ 5 : RS_485- • $% Moves up/down in menu. •...
  • Page 20 Operating Your Camera 3. Use the Up/Down buttons to select a desired function. • Move the button right or left to display available values or settings. Set the desired setting value using the button. 4. To finish, select <eXit> and press the SET button. An item with the icon also has sub menus.
  • Page 21 eXpoSure 1. When the SETUP menu screen is displayed, MAIN SETUP select <eXpoSure> by using the Function Setup switch so that the arrow indicates 1. LENS 2. EXPOSURE ► <eXpoSure> . 3. WHITE BAL 2. Select a desired mode using the Function SIMPLE FOCUS INIT ➝...
  • Page 22 (low, middle, high). OFF : Turn off Defogging function. • SSDR(samsung super dynamic Range) : SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas.
  • Page 23 wHite BaL (wHite BaLance) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select <wHite BaL>. by using the Function MAIN SETUP Setup switch so that the arrow indicates 1. LENS <wHite BaL>.
  • Page 24 Operating Your Camera SimpLe focuS You can adjust the focus of video image. 1. When the SETUP menu screen is displayed, MAIN SETUP SIMPLE FOCUS > by using the Function select < Setup switch so that the arrow indicates 1. LENS 2.
  • Page 25 • HLc (High Light compensation) : If the scene HLC SETUP contains extremely bright light areas such as; from car headlight, the light can mask out much 1. LEVEL MIDDLE ► BLACK MASK COLOR of the on-screen detail..* ..MASK TONE ..
  • Page 26 Operating Your Camera SSnr3 This function reduces the background noise in a low luminance environment. 1. When the SETUP menu screen is displayed, MAIN SETUP select <SSnr3> by using the Function Setup switch so that the arrow indicates <SSnr3>. 1. LENS 2.
  • Page 27 • auto : The mode is switched to <coLor> in DAY/NIGHT AUTO SETUP a normal environment, but switches to <B/w> 1. COLOR  B/W mode when ambient illumination is low. To set ► DWELL TIME 5 SEC up the switching time for AUTO mode, press DURATION FAST the Function Setup switch.
  • Page 28 Operating Your Camera • cam titLe : If you enter a title, the title will CAMERA TITLE SETUP appear on the monitor. a B c D e f G H i J K L m 1) If the SPECIAL menu screen is displayed, use n o p Q r S t u v w X y Z the Function Setup switch so that the arrow a b c d e f g h i j k l m...
  • Page 29 • imaGe aDJ : SPECIAL SETUP 1) When the SPECIAL menu screen is displayed, select <imaGe aDJ> by using the Function 1. CAM TITLE 2. IMAGE ADJ ► Setup switch so that the arrow indicates 3. INTELLIGENCE <imaGe aDJ>. 4. PRIVACY PROFILE BASIC COMM ADJ...
  • Page 30 Operating Your Camera • inteLLiGence : Commands the camera to INTELLIGENCE motion-detect and trace an object. 1. DETECTION ► DETECTION : Since the camera detects 2. TRACKING motion without any additional external sensor, 3. FIXED/MOVED 4. TAMPERING you can monitor activity more effcient. 5.
  • Page 31 TRACKING TRACKING ► SEL POS POS1 ► SEL POS POS1 ........ X POS X POS ....12 ....12 Y POS Y POS DIRECTION DIR1 DIRECTION RETURN RETURN...
  • Page 32 Operating Your Camera SENSITIVITY : Set the sensitivity of the motion detection. When adjusting the ▶ sensitivity, note that the lower the level means the higher sensitivity. DET. SIZE : Selects an object size to detect on the screen. When adjusting the ▶...
  • Page 33 menu settings and return to the RETURN : Select this to save the TYPE 2 ▶ PRIVACY menu. - RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu. pROfIle : S elect a desired mode using the Function ...
  • Page 34 - RET PKT : Specify whether to return the same command to the controlling device when a control command is delivered to the camera. When protocol such as SAMSUNG-T,SAMSUNG-E,Pelco-D&Pelco-P are in using, you can use preset95 command to activate Menu.
  • Page 35: Troubleshooting

    trouBLeSHootinG PROBLEM SOLUTION y Check that the power cord and line connection between the camera and monitor are properly connected. y When the camera’s HD-SDI BNC output is directly connected to the monitor’s BNC terminal: Make sure the monitor supports HD-SDI signal input. Nothing appears on the screen.
  • Page 36: Appendix

    appendix Specification Items Description 1/3" Progressive Scan CMOS Video 2,010(H) x 1,108(V), 2.2M Pixels Total Pixels 1,944(H) x 1,092(V), 2.1M Pixels Effective Pixels Progressiv Scan Scanning System Video Color : 1Lux @ F1.2, 0.017 Lux (Sens-up, 60x) Min. Illumination B/W : 0.1 Lux @ F1.2, 0.0017 Lux ( Sens-up, 60x) 50dB (AGC off, Weight on) S / N Ratio SMPTE292M ( HD-SDI ), Monitoring CVBS...
  • Page 37 Off / On (2x ~ 16x) Digital Zoom Off / H-Rev / V-Rev / HV-Rev Reverse RS-485 Communication RS-485 : SAMSUNG-T, SAMSUNG-E, Pelco-D, Pelco-P, Bosch, Protocol Honeywell, Vicon, Panasonic, GE, AD Operating Temperature -10°C~+55°C (14°F~131°F) / ~90% RH Environmenta / Humidity Dual ( 24VAC±10% &...
  • Page 38: Product Overview

    appendix proDuct overview Unit : mm (inch) 147.8(5.82") 73.1(2.88") Ø 6.5 HOLE (Ø 0.26") Ø 1/4'-20 UNC-2B 14 (0.55") 67.7 (2.67") 34_ appendix...
  • Page 39 Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
  • Page 40 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...

Table of Contents