Energy Saving Settings; Configuring Sleep Mode Settings At The Control Panel - Xerox WorkCentre 7500 Series System Administration Manual

Administrator Tools

Energy Saving Settings

Configuring Sleep Mode Settings at the Control Panel

At the printer control panel, press the Machine Status button, then touch the Tools tab.
1.
2. Touch Device Settings > General > Energy Saver.
3. Touch an option:

Intelligent Ready: The printer wakes and sleeps based on previous usage.

Job Activated: The printer wakes when it detects activity.

Scheduled: The printer wakes and sleeps according to a schedule you specify.
4. Under Fast Resume, touch On to reduce the wake time. This option changes the default sleep and
low-power timeout periods, and increases energy usage.
5. If you selected Scheduled as the Energy Saver Mode, touch Scheduled Settings to select the times
that you want the printer to wake or sleep.
6. Touch a day of the week in the list.
Under Schedule Based On, touch Activity to allow the printer to wake on activity for that day. Touch
7.
Time to wake the printer at a certain time.
8. If you selected Time, touch Warm Up Time, and select the time that the printer wakes on that day.
Touch Energy Saver Time, and select the time that the printer sleeps on that day.
Touch Save.
9.
172 WorkCentre 7500 Series Multifunction Printer
System Administrator Guide