Examples Of Show Commands - Cisco ASR 9000 Getting Started Manual

Services router
Hide thumbs Also See for ASR 9000:
Table of Contents

Advertisement

Chapter
Bringing Up Cisco IOS XR Software on the Router

Examples of show Commands

The following sections provide examples of show commands:
show version Command: Example
The following example shows how to display basic information about the router configuration by
entering the show version command in EXEC mode.
RP/0/RSP0/CPU0:router# show version
Mon May 31 02:23:47.984 DST
Cisco IOS XR Software, Version 4.2.0.29I[Default]
Copyright (c) 2010 by Cisco Systems, Inc.
ROM: System Bootstrap, Version 1.4(20100216:021454) [ASR9K ROMMON],
router uptime is 2 weeks, 6 days, 10 hours, 30 minutes
System image file is "bootflash:disk0/asr9k-os-mbi-4.2.0/mbiasr9k-rp.vm"
cisco ASR9K Series (MPC8641D) processor with 4194304K bytes of memory.
MPC8641D processor at 1333MHz, Revision 2.2
2 Management Ethernet
12 TenGigE
40 GigabitEthernet
219k bytes of non-volatile configuration memory.
975M bytes of compact flash card.
33994M bytes of hard disk.
1605616k bytes of disk0: (Sector size 512 bytes).
1605616k bytes of disk1: (Sector size 512 bytes).
Configuration register on node 0/RSP0/CPU0 is 0x102
Boot device on node 0/RSP0/CPU0 is disk0:
Package active on node 0/RSP0/CPU0:
asr9k-optics-supp, V 4.2.0[DT_IMAGE], Cisco Systems, at disk0:asr9k-optics-s
upp-4.2.0
ace for pie
asr9k-fwding, V 4.2.0[DT_IMAGE], Cisco Systems, at disk0:asr9k-fwding-4.2.0.
15I
ace for pie
show platform Command: Example
The show platform command displays information on router resources. In EXEC mode, the show
platform command displays the resources assigned to the RP that you are managing. In administration
EXEC mode, the show platform command displays all router resources.
RP/0/RSP0/CPU0:router# show platform
Mon May 31 02:31:55.913 DST
OL-28417-02
show version Command: Example, page 33
show platform Command: Example, page 33
show redundancy Command: Example, page 34
show environment Command: Example, page 35
Built on Thu May
6 16:52:16 DST 2010
By sjc-lds-364 in /auto/ioxbuild6/production/4.2.0.DT_IMAGE/asr9k/worksp
Built on Thu May
6 16:43:46 DST 2010
By sjc-lds-364 in /auto/ioxbuild6/production/4.2.0.DT_IMAGE/asr9k/worksp
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
Verifying the System After Initial Boot
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents