Cisco ASR 9000 Getting Started Manual page 67

Chapter Configuring General Router Features
Managing Configuration Sessions
Displaying Configuration Error Messages and Descriptions
Configuration changes are automatically verified during the commit operation, and a message appears
if one or more configuration entry fails. To display an error message and description for a failed
configuration, enter the show configuration failed command.
You can view configuration errors only during the current configuration session. If you exit
Note
configuration mode after the commit operation, the configuration error information is lost.
In the following example, an error is introduced in global configuration mode and the error information
appears after the commit operation fails:
RP/0//CPU0:router# configure
RP/0//CPU0:router(config)# taskgroup alr
RP/0//CPU0:router(config-tg)# description this is a test of an invalid taskgroup
RP/0//CPU0:router(config-tg)# commit
% Failed to commit one or more configuration items. Please use 'show configuration failed'
to view the errors
RP/0//CPU0:router(config-tg)# show configuration failed
!! CONFIGURATION FAILED DUE TO SEMANTIC ERRORS
taskgroup alr
!!% Usergroup/Taskgroup names cannot be taskid names
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
57
OL-28417-02