Video Monitoring Limits - Cisco ASR 9000 Getting Started Manual

Configuration Limiting

Video Monitoring Limits

Table 20
their performance metrics.
Table 20
Category
Class Maps
Policy Maps
Video Monitoring service
policies
Monitored Flows
Flow Rate at Layer 3
Flow Rate at Media Layer
Delay Factor (DF) Precision 1 millisecond
Media Rate Variation (MRV)
range
Flow History
Interval Duration
Reacts
For more information about each category, see the "Implementing Video Monitoring Service on Cisco
Note
ASR 9000 Series Routers" chapter in Cisco ASR 9000 Series Aggregation Services Router IP Addresses
and Services Configuration Guide.
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
106
summarizes the maximum values for video monitoring configuration, monitored flows, and
Video Monitoring Limits
Maximum Value
1024 per policy map
1024 per system
256 per system
One policy per interface
4096 per Network Processor (NP)
4096 per class map
4096 per policy map (8192 per policy map
when attached to a bundle interface.)
280 kpps per flow
3 Gbps per flow
999.999%
60 intervals per flow
300 seconds per interval
14 reacts per class map
Chapter Configuring Additional Router Features
Comments
The maximum value is valid when the
keyword is traffic.
The maximum value is valid when the
keyword is performance-traffic.
The maximum values is valid when the
keyword is performance-traffic.
Includes both static and dynamic flows.
Equivalent to uncompressed high definition
(HD) video streams. The absolute
configuration maximum value is 1 Mpps per
flow.
Equivalent to uncompressed high definition
(HD) video streams.
—
Minimum range is -100%
Default value is 10 intervals per flow.
Default value is 30 seconds per interval.
Minimum value is 10 seconds that can be
incremented by 5 seconds.
This value is specific to Cisco ASR
Note
9000 Series Aggregation Series
Router running Cisco IOS XR
Software Release 4.0.
OL-28417-02