Cisco ASR 9000 Getting Started Manual page 153

Services router
Hide thumbs Also See for ASR 9000:
Table of Contents

Advertisement

Troubleshooting the Cisco IOS XR Software
Enter the show platform command in administration EXEC to verify that all nodes are in the "IOS XR
Step 1
RUN" state:
RP/0/RSP0/CPU0:router(admin)# show platform
Tue Jun
Node
-----------------------------------------------------------------------------
0/RSP0/CPU0
0/FT0/SP
0/FT1/SP
0/1/CPU0
0/4/CPU0
0/6/CPU0
0/PM0/SP
0/PM1/SP
0/PM2/SP
Enter the show ipv4 interface brief command to verify the IP address configuration and protocol status:
Step 2
RP/0/RSP0/CPU0:router# show ipv4 interface brief
Interface
gi0/1/0/0
gi0/1/0/1
gi0/1/0/2
gi0/1/0/3
gi0/1/0/4
gi0/1/0/5
gi0/1/0/6
gi0/1/0/7
gi0/1/0/8
gi0/1/0/9
gi0/1/0/10
gi0/1/0/11
gi0/1/0/12
gi0/1/0/13
gi0/1/0/14
gi0/1/0/15
gi0/2/0/0
gi0/2/0/1
gi0/2/0/2
gi0/2/0/3
TenGigE0/3/0/0
TenGigE0/3/0/2
MgmtEth0/RSP0/CPU0/0
Configure the interfaces, as shown in the following examples.
Step 3
Note
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface gi0/2/0/1
RP/0/RSP0/CPU0:router(config-if)# ipv4 address 10.1.1.1 255.0.0.0
RP/0/RSP0/CPU0:router(config-if)# no shutdown
RP/0/RSP0/CPU0:router(config-if)# commit
RP/0/RSP0/CPU0:router(config-if)# end
RP/0/RSP0/CPU0:router#
OL-28417-02
1 00:06:45.437 DST
Type
A9K-RSP-4G(Active)
FAN TRAY
FAN TRAY
A9K-40GE-B
A9K-8T/4-B
A9K-4T-B
A9K-3KW-AC
A9K-3KW-AC
A9K-3KW-AC
You must enter the commit command to make the new configuration part of the active running
configuration. If you end the configuration session, you are automatically prompted to commit
the changes, as shown in the second example:
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
State
IOS XR RUN
READY
READY
IOS XR RUN
IOS XR RUN
IOS XR RUN
READY
READY
READY
IP-Address
Status
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
10.10.1.101
Down
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
Interfaces Not Coming Up
Config State
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
Protocol
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
149

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents