Cisco ASR 9000 Getting Started Manual page 44

Verifying the System After Initial Boot
Node
-----------------------------------------------------------------------------
0/RSP0/CPU0
0/1/CPU0
0/4/CPU0
0/6/CPU0
The following administration EXEC mode example shows all router nodes:
RP/0/RSP0/CPU0:router# admin
RP/0/RSP0/CPU0:router(admin)# show platform
Mon May 31 02:35:05.459 DST
Node
-----------------------------------------------------------------------------
0/RSP0/CPU0
0/FT0/SP
0/FT1/SP
0/1/CPU0
0/4/CPU0
0/6/CPU0
0/PM0/SP
0/PM1/SP
0/PM2/SP
RP/0/RSP0/CPU0:router# end
The following example displays information for a single node in the router:
RP/0/RSP0/CPU0:router# show platform 0/1/CPU0
Tue Jun 16 23:45:17.976 PST
Node
-----------------------------------------------------------------------------
0/1/CPU0
For more information on node IDs, see Cisco ASR 9000 Series Aggregation Services Router System
Management Configuration Guide.
For more information on the show platform command, see Cisco ASR 9000 Series Aggregation Services
Router Interface and Hardware Component Command Reference.
show redundancy Command: Example
The following example shows how to display information about the active and standby (inactive) RPs by
entering the show redundancy command.
RP/0/RSP0/CPU0:router# show redundancy
Tue Jan
Redundancy information for node 0/RSP0/CPU0:
==========================================
Node 0/RSP0/CPU0 is in ACTIVE role
Partner node (0/RSP1/CPU0) is in STANDBY role
Standby node in 0/RSP1/CPU0 is ready
Standby node in 0/RSP1/CPU0 is NSR-ready
Reload and boot info
----------------------
A9K-RSP-4G reloaded Wed Dec 31 23:59:48 2008: 5 days, 22 hours, 49 minutes ago
Active node booted Wed Dec 31 23:59:48 2008: 5 days, 22 hours, 49 minutes ago
Standby node boot Thu Jan
Standby node last went not ready Thu Jan
Standby node last went ready Thu Jan
There have been 0 switch-overs since reload
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
34
Type
A9K-RSP-4G(Active)
A9K-40GE-B
A9K-8T/4-B
A9K-4T-B
Type
A9K-RSP-4G(Active)
FAN TRAY
FAN TRAY
A9K-40GE-B
A9K-8T/4-B
A9K-4T-B
A9K-3KW-AC
A9K-3KW-AC
A9K-3KW-AC
Type
A9K-40GE-B
6 22:49:15.719 UTC
1 00:35:52 2009: 5 days, 22 hours, 13 minutes ago
Chapter Bringing Up Cisco IOS XR Software on the Router
State Config State
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
State Config State
IOS XR RUN PWR,NSHUT,MON
READY
READY
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
READY PWR,NSHUT,MON
READY PWR,NSHUT,MON
READY PWR,NSHUT,MON
State Config State
IOS XR RUN PWR,NSHUT,MON
1 00:39:17 2009: 5 days, 22 hours, 9 minutes ago
1 00:39:17 2009: 5 days, 22 hours, 9 minutes ago
OL-28417-02