Av Connector Connection; System Control Connections - Pioneer DV-545 Operating Instructions Manual

AV CONNECTOR Connection

Using a commercially available 21-pin SCART cable,
connect the AV CONNECTOR on the player to a TV or
monitor to achieve audio and video with a single
connection.
• The AV CONNECTOR 1 (RGB)-TV can be set to
output composite video, S-video, or RGB signals.
After making physical connections to your TV or
monitor, select the most appropriate video format in
the [Video Out] setting in the Setup screen Video 1
menu (page 30).
• The AV CONNECTOR 2 only outputs composite
video.
• SCART cables are available in a variety of
configurations. Before making connections, be sure
to check that the cable you are planning to use is
appropriate for the TV or monitor you are making
connections to.
• AV CONNECTOR pin signal descriptions can be
found in the 'Specifications' (page 65).
AV CONNECTOR 1 (RGB)-TV
AV CONNECTOR 1 (RGB)-TV
CONTROL
VIDEO OUT
S
IN
AV CONNECTOR (RGB)-TV
AV CONNECTOR 2
AV CONNECTOR 1 (RGB)-TV
CONTROL VIDEO OUT
S
IN
VCR or SET TOP BOX etc.
16
En
AV CONNECTOR 2
DIGITAL OUT
AUDIO OUT
OPTICAL COAXIAL
AC IN
R L
TV or monitor
AV CONNECTOR 2 DIGITAL OUT
AUDIO OUT
OPTICAL COAXIAL
AC IN
R L
AV CONNECTOR 2

System Control Connections

Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this
player's CONTROL IN jack to the CONTROL OUT jack
of another PIONEER component bearing the Î mark,
you can control the player as though it were a
component in a system (system control).
• If you connect for system control, you cannot
operate the player directly. Point the remote control
unit at the component (AV amplifier, etc.) connected
to the CONTROL OUT jack to operate.
• When controlling as a system, be sure to make a
connection to the amplifier using an audio or video
cord, even when using only digital components.
• For details, refer to the operation manuals of the
connected components.
AV CONNECTOR 1 (RGB)-TV
CONTROL VIDEO OUT AUDIO OUT
S
IN R L
Pioneer component with Î mark.
CONTROL
IN
AV CONNECTOR 2
DIGITAL OUT
OPTICAL COAXIAL
AC IN
CONTROL
OUT