Av Connector Connection; System Control Connections - Pioneer dv-525 Operating Instructions Manual

AV CONNECTOR Connection

Using a commercially available 21-pin SCART cable,
connect the AV CONNECTOR jack on the player to a TV
or monitor to achieve audio and video with a single
connection.
• In addition to making physical connections to your TV
or monitor, it is also necessary to set the video output
format to composite video, S-video, or RGB in the
Setup screen Video menu (page 20).
• SCART cables are available in a variety of
configurations. Before making connections, be sure to
check that the cable you are planning to use is
appropriate for the TV or monitor you are making
connections to.
• AV CONNECTOR pin signal descriptions can be found
in the 'Specifications' (page 57).
DV-525
AV CONNECTOR
18
En

System Control Connections

Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this player's
CONTROL IN jack to the CONTROL OUT jack of another
PIONEER component bearing the Î mark, you can
control the player as though it were a component in a
system (system control).
• If you connect for system control, you cannot operate
• When controlling as a system, be sure to make a
• For details, refer to the operation manuals of the
TV or monitor
the player directly. Point the remote control unit at the
component (AV amplifier, etc.) connected to the
CONTROL OUT jack to operate.
connection to the amplifier using an audio or video
cord, even when using only digital components.
connected components.
DV-525
CONTROL
IN
Pioneer component
with Î mark.
CONTROL
OUT