Setting The Parental Lock Level - Pioneer DV-545 Operating Instructions Manual

Setting the Parental Lock
Level
– DVD-Video
This player lets you set the Parental Lock if the DVD-
Video has a parental lock level recorded on it. With
Parental Lock capable discs, you can block access to
material you feel is inappropriate for your children. Refer
to the DVD-Video disc jacket and the accompanying
documentation to see if a particular disc contains a
parental lock level.
Make changes to the [Parental Lock] setting in the
Setup screen General menu. Please note that changes
to the Parental Lock level cannot be made when a disc is
playing. Stop playback of the disc before attempting to
make any changes.
You cannot select [Level] or [Country Code] until you
have registered a password. Select [Password] to
register a new password. See 'Entering the password'
on the this page for how to register a new password.
Audio1 A2 Video1 V2 Language
Setup Menu Mode
Setup Navigator
Parental Lock
Setup viewing restrictions
Move
Settings: Password (Password Change)
(For information, refer to 'Entering the
Password' on the this page.)
Level
(For information, refer to 'Setting the
Parental Lock Level' on the following
page.)
Country Code
(For information, refer to 'Setting the
Country Code' on the following page.)
When a DVD-Video with a Parental Lock level
is loaded
Playback cannot be started until the code number has
been correctly input by moving the Joystick or the
number buttons, and ENTER has been pressed.
General
— Basic
— Password
Level
Country Code
Exit
SETUP
Entering the Password
When you select either [Level] or [Country Code], it is
necessary to register the password (4-digit code
number). You'll be asked to confirm your existing
password before registering a new one. Use the
following steps at any time you are asked to enter or
confirm your password.
1
Select [Password] in the [Parental Lock]
setting and press ENTER.
2
Move the Joystick up or down or the
number buttons to select a number
between 0 and 9.
You can also use the number buttons to enter the
numbers directly. When entering your password for
the first time, or changing it, you will be asked to
reenter your password. When using the number
buttons to confirm the password, the numbers
appear as asterisks, and the cursor advances
automatically to the next position.
Audio1 A2 Video1 V2 Language
Prental Lock: Register Code Number
Enter 4—Digit Code
+/–
Move
3
Move the Joystick left or right to move the
cursor to a different position in the
password.
When all four numbers of the passoword have been
entered, ENTER appears on the screen.
Audio1 A2 Video1 V2 Language
Prental Lock: Register Code Number
1 0
Enter 4—Digit Code
+/–
Move
4
Press ENTER to set the password.
The password is entered.
Note
Be sure not to forget your password. If you should forget it,
reset the system, and enter a new password. To reset the
system, see 'Resetting the Player to System Settings'
(page 55). Please note that this procedure resets the system,
and clears all saved settings, not just the password.
General
RETURN Return
Exit
ENTER
General
1 9
ENTER
Return
RETURN
Exit
SETUP
53
En