Viewing From A Desired Camera Angle (Multi-Angle) - Pioneer DV-545 Operating Instructions Manual

Viewing from a Desired
Camera Angle (Multi-Angle)
– DVD-Video
You can select a camera angle when viewing DVD-Video
discs with the multi-angle option.
DISPLAY AUDIO
SET UP
MENU
ENTER
FUNCTION VIDEO
MEMORY ADJUST
F.MEM V.ADJ
Press ANGLE during playback.
The camera angle changes each time you press the
button.
Angle : 1/4
\
»
Angle : 4/4
|
Notes
• You can use the Multi-Angle function only with discs
featuring recordings of images shot from different camera
angles.
• During Multi-Angle playback, the
display lights.
• For some discs, selection can be made using the DVD-
Video menu. In this case, press MENU to display the
DVD-Video menu screen and then make your selection.
OPEN /
CLOSE
SUBTITLE ANGLE
ANGLE
TOP MENU
DIMMER JOG MODE
FL JOG
Angle : 2/4
«
Angle : 3/4
indicator in the
To check whether or not a disc is recorded
with angles
The jacket of discs that are recorded with angles will be
marked with . When locations on discs that are
recorded with angles are played back, the
can be displayed.
To cancel the angle mark, set [Angle Indicator] to
[Off] in the Setup screen Video 2 menu described in
the section below.
Turning the angle indicator on and
off
When a picture recorded in different angles is played
back is displayed on the screen. This setting lets
you see clearly whether the playback picture is
recorded in multiple angles or not.
Turn the angle indicator on or off in the [Angle
Indicator] setting in the Setup screen Video 2 menu in
the [Expert] menu mode (page 25).
A2 V1
Audio1 Video2
Background
Video Adjust
Still Picture
On Screen Display
Angle Indicator
Move
Settings: On* ( is displayed)
Off (Not Displayed)
Note
Even when the [Angle Indicator] setting is set to [Off], the
indicator in the display panel of the player lights during
multi-angle playback. Therefore, it is possible to know when
the multi-angle function can be used without having to
display the icon on the screen.
indicator
Language General
— Pioneer Logo
— Auto
— Position-Normal
— On
Off
Exit
SETUP
*Factory setting
33
En