Getting Surround Sound From Stereo Speakers; Legato Pro; Hi-Bit - Pioneer DV-545 Operating Instructions Manual

Getting Surround Sound from
Stereo Speakers
TruSurround (stereo audio sources) to produce a
surround sound effect from stereo speakers.
This function works only when connections are
made to the AUDIO OUT jacks and AV CONNECTOR
1 (RGB)-TV.
A1 Audio2
Virtual Surround
Surround effect from 2 speakers
Move
Settings: Off*
TruSurround
Notes
• There is no effect when the audio source is either DTS or
96 kHz LPCM or during CD or MP3 playback.
• The digital audio output level is reduced when playing 2
channel Dolby Digital DVDs or Video CDs with TruSurround
selected. If you play a multichannel Dolby Digital DVD with
Dolby Digital to PCM conversion (see page 26) and
TruSurround selected, there is no digital output.
• How good the surround effect is varies with the disc.
TruSurround
TruSurround uses technology that simulates
multichannel surround sound using only two speakers.
28
En
– DVD/Video CD
Language General
Video1 V2
— Off

Legato Pro

TruSurround
SETUP Exit
*Factory setting
Legato PRO
Legato PRO subtly changes the character of the sound.
There are four settings plus [Off]:
Choose the setting that best suits the music you're
listening to. [Standard] is recommended for all music.
A1 Audio2 Video1 V2
Virtual Surround
Legato Pro
Wide Range Digital Filter
You can select the quality of sound
Move
Settings: Off*
Standard
(Gives the sound a more forward, live feel)
Effect 1
(Bright and lively)
Effect 2
(Soft and rich)
Effect 3
(Solid and well balanced)
Notes
• The Legato PRO digital filter affects mainly frequencies
outside of the audible range.
• Depending on the listening conditions, you may find the
effect of Legato PRO difficult to hear.
• The Legato PRO effect is only applied to the front left/right
channels.
• Legato PRO effect is not output through the digital out.

Hi-bit

When set to [On], this feature extends the dynamic
range of the main front speakers by effectively
increasing the bit depth from 16-20 bit to 24 bit. This
allows the player to reveal greater detail in low level
audio.
Make changes to the [Hi-bit] setting in the Setup
screen Audio 2 menu in the [Expert] menu mode
(page 25).
A1 Audio2 Video1
Virtual Surround
Legato Pro
Hi-bit
Move
Settings: On*
Off
Language General
Off
Standard
Effect1
Effect2
Effect3
Exit
SETUP
*Factory setting
Language General
V2
— Off
— Off
On
Off
SETUP Exit
*Factory setting