Video Connections; Av Connector Connection; System Control Connections - Pioneer DV-444-K Operating Instructions Manual

Video Connections

This player features S-video and composite video output
possibilities.
Check the manual supplied with your TV or monitor to
determine the best possible connection for your system.
In addition to making physical connections to your TV or
monitor, it is also necessary to assign the TV screen size. You
can use the [Setup Navigator] in the Setup screen General
to set whether you are using a wide screen or standard size
TV or monitor (page 16). Additionally, you can use the [TV
Screen] setting in the Setup screen Video1 menu (page 27).
S-VIDEO OUT
• Make S-video connections to a TV or monitor with S-video
input to produce a high quality video image.
• Use an S-video cable (not supplied) to connect the S-
VIDEO OUT jack on the player to S-video input on the TV
or monitor.
AV CONNECTOR (RGB)-TV
CONTROL VIDEO OUT
S
∞
IN
VIDEO OUT
S
∞
VIDEO OUT
• Make composite video connections to a standard TV or
monitor with a video input jack.
• Use the supplied video cable to connect one of the VIDEO
OUT jack on the player to the video input on the TV or
monitor.
• Be sure to match the color of the plug with the color of the
jack (yellow).
AV CONNECTOR (RGB)-TV
CONTROL VIDEO OUT
S
∞
IN
VIDEO OUT
S
∞
14
En
AV CONNECTOR 2 DIGITAL OUT
AUDIO OUT
OPTICAL COAXIAL
AC IN
R L
TV or monitor
S-VIDEO IN
AV CONNECTOR 2
DIGITAL OUT
AUDIO OUT
OPTICAL COAXIAL
AC IN
R L
TV or monitor
VIDEO IN

AV CONNECTOR Connection

Using a commercially available 21-pin SCART cable, connect
the AV CONNECTOR (RGB)-TV jack on the player to a TV or
monitor to achieve audio and video with a single connection.
• SCART cables are available in a variety of configurations.
Before making connections, be sure to check that the
cable you are planning to use is appropriate for the TV or
monitor you are making connections to.
• AV CONNECTOR pin signal descriptions can be found in
the 'Specifications' (page 60).
AV CONNECTOR (RGB)-TV
CONTROL VIDEO OUT
AUDIO OUT
S
∞
IN R L
AV CONNECTOR (RGB)-TV

System Control Connections

Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this player's
CONTROL IN jack to the CONTROL OUT jack of another
PIONEER component bearing the Î mark, you can control
the player as though it were a component in a system
(system control).
• If you connect for system control, you cannot operate the
player directly. Point the remote control unit at the
component (AV amplifier, etc.) connected to the
CONTROL OUT jack to operate.
• When controlling as a system, be sure to make a
connection to the amplifier using an audio or video cord,
even when using only digital components.
• For details, refer to the operation manuals of the
connected components.
AV CONNECTOR (RGB)-TV
CONTROL VIDEO OUT
AUDIO OUT
S
∞
IN R L
Pioneer component with Î mark.
CONTROL
IN
AV CONNECTOR 2
DIGITAL OUT
OPTICAL COAXIAL
AC IN
TV or monitor
AV CONNECTOR 2
DIGITAL OUT
OPTICAL COAXIAL
AC IN
CONTROL
OUT