Oce VarioPrint 1055 Configuration And Maintenance Manual page 59

[19]
Job
Copy job
Automatic print job
Mailbox job
Scan job
Before you begin
Enter the Key operator system
page 32).
Illustration
[48]
[48] Enable the copy control device
Configuring the copy control device
Press the 'Accounting' key.
1.
Select the 'General' tab.
2.
Press the 'Copy control device' key to select 'Enabled'.
3.
Check
Quit the Key operator system.
1.
To check the selection, make a test job.
2.
Open the Accounting system, to see if the test job is charged to the Copy control
device account.
Enable the Copy control device connected to the Network Printer
Requirement
The user must insert coins or
a credit card, to access the
machine.
The user can perform an
automatic print job if
automatic print jobs are
permitted.
The user must enter coins or
a credit card, to access the
mailbox.
The user must enter coins or
a credit card, to access the
machine.
(see 'Enter or quit the key operator system' on
Charges
Jobs are charged to the
'Copy control device'
system account.
Jobs are not charged to
any account.
Jobs are charged on the
'Copy control device'
system account.
Jobs are charged on the
'Copy control device'
system account.
59