Status Display - Bosch VMS Operator's Manual

Bosch Video Management System
3
4
11.2.1

Status display

The status display changes dynamically to display information about the keyboard's present
mode of operation.
The following illustration shows the various elements of the status display:
7
6
5
1
2
3
Bosch Sicherheitssysteme GmbH
Function keys
Numeric keypad with ENTER key
1
MON
A0
1
D1
PTZ
DSrv 1
4 4
Monitor
Camera
Server
Allow you to control certain functions directly.
Prod: Starts a scan process to find the connected
workstation. If scanning is successful: In the
softkey display, Terminal and Keyboard Control
menus are displayed. For selecting Bosch VMS,
press the Terminal softkey.
Mon: Allows you to enter a monitor number
(digital or analog monitor).
Clr: Clears any numeric entry or has a Back-
function.
: Currently not supported.
Shot: Allows you to select a camera pre-position
or to leave Selection mode.
Allows you to enter logical numbers. The number
is displayed in the status display.
Unless preceded by pressing the Mon or Shot
key, a numeric entry is interpreted as a logical
camera number. The camera with the entered
number is displayed in an Image pane or an
analog monitor.
2
CAM
1
Srv 1
3
Displays the selected analog monitor or Image pane
number.
Displays the selected camera number.
Displays the server number of the Management Server
where the currently selected camera is configured.
Operator's Manual
Using a CCTV keyboard | en
3
2013.07 | V1 | Operator Client
57