Table of Contents
Advertisement
16
en | Operation via the browser
3.1.3
Digital I/O
Depending on the configuration of the unit, the alarm input and
the output are displayed next to the image.
The alarm symbol is for information and indicates the status of
an alarm input:
–
–
The camera alarm output allows the operation of an external
device (for example, a light or a door opener).
4
The symbol is red when the output is activated.
3.1.4
System Log / Event Log
The System Log field contains information about the operating
status of the camera and the connection.
Events such as the triggering or the end of alarms are shown in
the Event Log field.
1.
2.
3.1.5
Recording status
The hard drive icon below the camera images on the LIVE page
changes during an automatic recording.
The icon lights up and displays a moving graphic
indicate a running recording. If no recording is taking place, a
static icon is displayed.
3.1.6
Saving snapshots
Individual images from the video sequence that is currently
being shown can be saved in JPEG format on the computer's
hard drive.
2015.04 | v1.592 | AM18-Q0678
Active 1 = Symbol lights
Active 0 = Symbol not lit.
To operate, click the relay symbol.
To view, filter and save these messages to a file, click
in the top right-hand corner.
To clear the log, click
the relevant field.
in the top right-hand corner of
Bosch Security Systems
Camera Browser
Interface
to
Advertisement
Table of Contents
