Using A Bosch Intuikey Keyboard Connected To A Workstation; Starting The Keyboard; Entering Operation Modes - Bosch VMS Operator's Manual

58 en | Using a CCTV keyboard
4
5
6
7
11.3

Using a Bosch IntuiKey keyboard connected to a workstation

A keyboard connected to a Bosch VMS workstation offers a wide variety of features. Both the
analog and the digital mode are available.
If the keyboard is connected to a decoder, the feature set is reduced. Only the analog mode is
available.
When connected to a workstation that is using an Enterprise System, you must first select the
desired Management Server and then the camera configured on this Management Server.
11.3.1

Starting the keyboard

The keyboard must be connected to a COM port of a workstation.
1.
2.
3.
11.3.2

Entering operation modes

You can use the keyboard in the following modes:
–
–
–
To enter Selection Mode:
1.
2.
To enter PTZ Mode:
1.
2.
To enter Jogshuttle Mode:
1.
2.
To leave PTZ or Jogshuttle Mode:
4
2013.07 | V1 | Operator Client
Default Server
PTZ / JOGSHUTTLE
D1
A0
Start the Operator Client on the workstation.
Press the Prod button.
The keyboard scans for connected devices.
Press the Terminal softkey.
The Selection Mode is displayed.
Selection Mode
This mode allows you to select an Image pane by moving the joystick in the desired
direction.
PTZ Mode
This mode allows you to control fixed and PTZ cameras, maps, and documents in Live
Mode.
Jogshuttle Mode
This mode allows you to control cameras in instant playback or in Playback Mode.
Start the Operator Client and the keyboard.
or
Press ENTER to leave PTZ or Jogshuttle Mode and to return to Selection Mode.
Select a PTZ camera.
Press Shot.
To start a preposition, press Shot again, press the number of a preposition, and press
ENTER.
Start Playback Mode.
Press Shot.
Press ENTER to leave PTZ or Jogshuttle Mode and start Selection Mode again.
Displays the server number of the Management Server
of an Enterprise System that the keyboard uses as
default server. The Logical Tree of this server is
displayed in the Tree Mode.
Displays the current operation mode.
Displays the selected computer monitor number.
Displays the selected analog monitor number.
Operator's Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH