Finding Recorded Video Data; Displaying Video Via Low Bandwidth - Bosch VMS Operator's Manual

Bosch Video Management System
Notes:
You can remove events or devices from the search.
9.14

Finding recorded video data

Main window >
dialog box
or
Main window > Tools menu > Find in Logbook... command > Please select a Server dialog box
> Select Search Parameters dialog box
For detailed information on the various fields, see the Online Help for the appropriate
application window.
To find video data:
1.
2.
3.
9.15

Displaying video via low bandwidth

Main window
You can play back the recordings of a camera or view live images of a camera with
Operator Client even if you have a low bandwidth network connection between Bosch VMS
and your Operator Client computer. For using low bandwidth networks, the VRM must be
equipped with at least one transcoding device. This transcoding device is not configured in
Bosch VMS. See the VRM documentation on how to configure a transcoding device.
Each transcoding device allows for transcoding 1 stream. For each additional stream you need
another transcoding device.
Transcoding is possible only for BVIP cameras connected to a VRM.
To enable transcoding:
4
P
To disable transcoding:
4
P
Bosch Sicherheitssysteme GmbH
> Tools menu > Find Video... command > Select Search Parameters
Enter or select the required search criteria.
Click Search.
The window with the matching entries is displayed.
For playing the corresponding video, double-click the entry. The corresponding video is
displayed.
In the Logical Tree, right-click the desired camera and click Enable transcoding.
This camera shows transcoded video when you drag the camera to an Image pane.
In the toolbar of this Image pane, the
If all transcoding devices managed by the responsible VRM are already in use and an
additional transcoding video is requested, the Image pane stays black. The title bar of the
Image pane displays the following text: Transcoder not available
In the Logical Tree, right-click the desired camera and click Disable transcoding.
This camera shows untranscoded video when you drag the camera to an Image pane.
The icon disappears.
If the affected camera is already displayed in an Image pane, it continues displaying
transcoded video until you close this Image pane.
icon is displayed.
Operator's Manual
Managing recorded videos | en
2013.07 | V1 | Operator Client
49