Monitors Window; Image Window - Bosch VMS Operator's Manual

Bosch Video Management System
Prepositions:
Select an entry to move the PTZ control to the predefined position.
Click to save the current position of the PTZ camera to the selected preposition entry.
AUX Commands:
Select an entry to execute this command.
12.27

Monitors window

Main window >
Notice!
The Monitors tab is not visible if your Operator Client is connected to more than one
Management Server.
Displays the available analog monitor groups. This tab is only visible if at least one analog
monitor group is configured and the analog monitor group is assigned to this workstation. If
the computer is not configured as a workstation, this assignment is not required.
Allows you to switch to the next or to the previous analog monitor group.
Allows you to switch to the previous or next alarm when there are more alarm cameras than
available monitors.
12.28

Image window

Main window
Bosch Sicherheitssysteme GmbH
Click to close the iris / open the iris.
> Monitors tab
Operator's Manual
User interface | en 87
2013.07 | V1 | Operator Client