Using One Channel Audio Mode; Using Multichannel Audio Mode - Bosch VMS Operator's Manual

Bosch Video Management System
–
–
–
–
In addition, for sequences displayed on an analog monitor via a decoder, DiBos cameras
cannot be displayed.
Notice!
When the configuration is changed and activated, a camera sequence (pre-configured or
automatic) usually is continued after restart of the Operator Client.
But in the following cases the sequence is not continued:
A monitor where the sequence is configured to be displayed has been removed.
The mode of a monitor (single/quad view) where the sequence is configured to be displayed
has been changed.
The logical number of a monitor where the sequence is configured to be displayed is
changed.
To start a camera sequence:
1.
2.
To pause a camera sequence:
4
To jump to the previous / next step of a camera sequence:
4
6.10

Using one channel audio mode

Main window
You use one channel audio mode when you want to hear only one audio source assigned to a
camera. You cannot activate audio for another camera.
To activate / de-activate multichannel audio mode:
1.
2.
6.11

Using multichannel audio mode

Main window
You use multichannel audio mode when you want to hear different audio sources at the same
time. You can activate different audio sources assigned to a camera in the Image pane of each
camera.
To activate / de-activate multichannel audio mode:
1.
2.
Bosch Sicherheitssysteme GmbH
Video loss
Connection to the camera lost
No permission to display the camera
Camera not configured
Select an Image pane where you want the sequence to be played.
Right-click a folder in the Logical Tree or Favorites Tree window and click Show as
sequence in selected Image pane.
The cameras of the selected folder are displayed one after the other in the selected
Image pane. indicates that the sequence is running.
In the Image window toolbar, click
The sequence stops playing, as indicated by
In the Image window toolbar, click
The sequence jumps to the previous or next step.
On the Extras menu, click Options....
Select the Playback audio of the selected Image pane check box.
On the Extras menu, click Options....
Select the Multichannel audio playback check box.
.
.
or
Operator's Manual
Displaying camera images | en
.
2013.07 | V1 | Operator Client
29