Alarm Mode (Alarm Display) - Bosch VMS Operator's Manual

70 en | User interface
Detailed information:
–
–
–
–
–
–
–
–
–
–
–
–
–
12.3

Alarm Mode (Alarm Display)

Main window >
The Alarm Image window displays live or instant playback video from a camera to be displayed
in case of an alarm. The Alarm Image window is displayed automatically if the incoming alarm
has a higher priority than the Live or Playback Image window. The priorities are configured in
the Configuration Client.
Allows you to view the alarm cameras. Alarm cameras are configured in the
Configuration Client.
If an incoming alarm has a lower priority than the currently displayed Image window, the
When more alarms are displayed than Alarm Image rows are available, the display in the last
row is sequenced. You can control the alarm sequence with the playback controls in the Alarm
Image window toolbar. You cannot perform instant playback in the last row.
2013.07 | V1 | Operator Client
Displays a site map. Allows you to drag the map to display a
particular section of the map.
If activated, a map is displayed automatically for each camera
Map
displayed in an Image pane. In this case, the camera must be
window
configured on a map.
Allows you to load exported video data to display it or to search
for particular data.
Exports
window
Allows to manage bookmarks.
Bookmarks
window
Menu commands, page 74
Logical Tree window, page 80
Favorites Tree window, page 81
Exports window, page 85
Map window, page 85
PTZ Control window, page 86
Monitors window, page 87
Image window, page 87
Image pane, page 88
Timeline window, page 89
Motion Search Results window, page 93
Video Search Results window, page 93
Alarm List window, page 93
or
tab starts blinking and indicates an alarm.
> tab > Select an alarm >
Operator's Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH