Bosch VMS Operator's Manual page 61

Bosch Video Management System
To use the Command Mode:
1.
2.
The following commands are available:
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Bosch Sicherheitssysteme GmbH
Switch to the Command Mode.
Press a softkey to execute the desired command.
: Load a sequence. In the Status Display, enter the sequence number.
: Sequence play, pause
/ : Sequence step forward / backward
: Maximize / restore selected Image pane
: Close selected Image pane
: Toggle between Live Mode and Playback Mode
: Toggle selected Image pane between Live Mode and instant playback
/ : Show more Image panes / less Image panes
/ : Start /stop alarm recording
: Audio on / off
NEXT: Switch to next page
/ / / : Trigger a user event (1-4), only available with single Management
Server
: Set the default Management Server, only available when you log on to
Operator Client as a user of an Enterprise User Group.
: Image pane bars on / off
: Full-screen on / off
Operator's Manual
Using a CCTV keyboard | en
UP
Level Up Camera2
Camera1
Map1
Folder1
Map2
Map3
DOWN DOWN
2013.07 | V1 | Operator Client
61