Bosch VMS Operator's Manual page 33

Bosch Video Management System
The following screenshot shows an example:
If you change the setting from stereo mix to microphone after the first start of
Operator Client, the setting is overridden after the next start of Operator Client.
We recommend to use a headset instead of a microphone-loudspeaker combination to avoid
acoustic feedback.
The Intercom functionality only works with an encoder that has both audio-in and audio-out.
Ensure that the volume settings for the encoder microphone and loudspeakers are not 0. You
perform this task in Configuration Client.
To use Intercom functionality on your workstation your user group must be granted to use it.
You perform this task in Configuration Client.
In the Options dialog box, you can configure half duplex or full duplex mode.
To use Intercom functionality:
1.
2.
3.
Bosch Sicherheitssysteme GmbH
Select an Image pane with an audio encoder.
Click and hold the mouse button. If audio was off for this Image pane, it is switched
on automatically.
The icon changes to
Now you can talk. If configured, the other side can talk also, regardless whether the icon
is clicked or not.
Release the mouse button. The transfer is interrupted.
Audio remains on for this Image pane.
.
Operator's Manual
Displaying camera images | en
2013.07 | V1 | Operator Client
33