Motion Search Dialog Box; Delete Video Dialog Box - Bosch VMS Operator's Manual

Bosch Video Management System
12.31

Motion Search dialog box

Main window >
Allows you to set up a search filter for motion in designated areas of a camera image. You
select the zones where you want to detect motion. You can search for motion only in the
selected Image pane.
Start:
Enter date and time for starting the search for motion. Clear the check box if you want the
search start at the very beginning of the recording.
End:
Enter date and time for finishing the search for motion. Clear the check box if you want the
search stop at the present point in time.
Select All
Click to select the whole image.
Clear Selection
Click to remove the selection.
Invert Selection
Click to invert the selection.
Display Grid
Click to select or clear for displaying a grid for defining the sensitive area where motion search
is performed.
Start Search
Click to start the search. The results are displayed in the Motion Search Results window.
12.32

Delete Video dialog box

Main window >
the Timeline menu, click Delete Video...
Allows you to delete video data from the beginning of the recording to the position of the
hairline.
Including:
The current selection of the Hairline is displayed. Change the value if required.
Bosch Sicherheitssysteme GmbH
Displays the Timelines of the cameras in the camera list.
Allows you rapid time positioning for playing the corresponding videos.
Using the Timeline, page 43
Exporting video data, page 45
Finding motion (only NVR recordings), page 47
Finding recorded video data, page 49
Authenticating video data (for NVR recordings only), page 44
Protecting video, page 44
Deleting video data, page 45
> tab
> Timeline tab > Move the Hairline to the desired position > On
Operator's Manual
User interface | en 91
2013.07 | V1 | Operator Client