Check Control; Indicator For Check Control - BMW X5 3.0i Owner's Manual

Check Control

*
Graphic display
The follow ing alerts or status messages
are displayed w ith icons from ignition
key position 2 and up until the defects
are corrected:
1 Check low beams
2 Add w asher fluid (goes out after
approx. 1 minute)
3 Door open
4 Tailgate open
5 Check brake and tail lam ps.
A defective center brake lamp is indi-
cated by the upper sym bol
When you open the door after stopping,
a w arning signal sounds w ithout a
visual indicator for:
> LIGHTS ON and
> KEY IN IGNITION LOCK.
*
Alphanumeric display
Text messages are used to alert the
driver to system m alfunctions w hen the
ignition key is turned to position 2. The
alert is accompanied by a gong.
1 Status report sym bol
2 Display
3 CHECK button
M essages concerning system faults are
differentiated based on tw o priorities:
Priority 1
These defects are im m ediately indi-
cated by a gong and a flashing w arning
sym bol 1. Sim ultaneous defects w ill be
displayed consecutively. These status
m essages rem ain in the display until the
defects are corrected. They cannot be
deleted by pressing the CHECK
button 3:
> RELEASE PARKINGBRAKE
> COOLANT TEM PERATURE
The coolant is overheated. Stop the
vehicle im m ediately and sw itch off
the engine. Refer to pages
and 160.
> STOP!ENGINE OILPRESS
The oil pressure is too low . Stop the
vehicle im m ediately and sw itch off
the engine. Refer to page 22.
Online Edition for Part No. 01 41 0 155 558 - © 09/00 BMW Group
79n
78