MANAGED 8-PORT 10/100 + 2 G DUAL PERSONALITY SWITCH
in a safe place. In writing this manual we used IP address 192.168.1.1 and Subnet Mask
(255.255.255.0).
2.2.2 Board Info
Parameter
Hardware Version
Firmware Version
Port Number
2.2.3 DHCP Configuration
Disable or enable the DHCP Client of the Switch. Once the DHCP Client is enabled, the
IP address of the Switch is obtained from DHCP Server and the Switch will reboot.
Users can check the new IP address from serial Console.
2.3
Configuration
Port Configuration
This section allows you to view and change the parameter settings for the individual
ports on the Switch. See screen shot and table below for adjustable parameters.
Description
Provides information on the hardware version
Provides information on the firmware version
Provides information on the number of ports available
7