Management Vlan - ZyXEL Communications MES-2110 Support Notes

MANAGED 8-PORT 10/100 + 2 G DUAL PERSONALITY SWITCH
is the highest priority.
Pri-Override Enable – the priority set in the Switch CAN take over the priority set on the
frames sent from other switches.
Disable –the priority set in the Switch CANNORT take over the priority set on the
frames sent from other switches.
Note: The function won't be enabled if this is not enabled in Priority Override
Configuration first. Please refer to 6.14.5 for more details.
The Port is a member of the specified VLAN and the frames of this VLAN can
Member be switched through this port, but the tagging information in the frame header is
not modified by the Switch.
The port is an untagging port (as defined in 802.1Q) that is participating in the
Untagging
VLAN. In such an untagged port the Switch will strip off the 802.1Q tag from the
incoming and outgoing frames if they are tagged in such a way. This is used for
sending frames to non-802.1Q-compliant devices.
The port is a tagging port (as defined in 802.1Q) and is participating in the
Tagging
VLAN. The Switch will put the VLAN information of the port – including VID and
Priority – into the header of the untagged frames coming in or transmitted from
the port. The tagged VLAN information in the frames can later be used by other
802.1Q-compliant devices for forwarding decisions.
The port is not participating in the VLAN as identified by the selected VID (VLAN
Non-member
ID).
Enter a valid configurable 802.1Q VID ranging from 1 ~ 4094 into the field on the first
row. Next, specify for each port the parameters described in the table above – this will
decide if the specific port will participate in that specific VID and how it will participate.
Click the "Apply" button to add the new VLAN to the Tag-based VLAN Table.

2.6.6 Management VLAN

The Management VLAN is the VLAN ID that in-band management stations belong to.
The Port VLAN ID of the port that receives the management messages must be the
same as the Management VLAN ID. The Web or Telnet session will be disconnected
after the Management VLAN is changed.
22