Mvr Configuration - ZyXEL Communications MES-2110 Support Notes

Managed 8-port 10/100 mbps plus 2-port gigabit dual personality access switch

Hide thumbs Also See for MES-2110:

Table of Contents

MANAGED 8-PORT 10/100 + 2 G DUAL PERSONALITY SWITCH

MES-2110(config-interface)# pvid 100

MES-2110(config-interface)# exit

MES-2110(config)# int port-channel 4,5,6

MES-2110(config-interface)# pvid 200

MES-2110(config-interface)# exit

MES-2110(config)# int port-channel 7,8,9

MES-2110(config-interface)# pvid 300

IGMP Setting

CLI Command

MES-2110(config)# igmp snooping

So client A can only receive the multicast packet from video Stream 225.1.0.1

So client B can only receive the multicast packet from video Stream 225.1.0.2

So client C can only receive the multicast packet from video Stream 225.1.0.3

2.11.4

MVR Configuration

Using MVR

Multicast VLAN Registration (MVR) is designed for applications that use multicast traffic

across an Ethernet ring-based service provider network, such as Media-on-Demand.

With MVR, a single multicast VLAN can be shared among different subscriber VLANs

on the network. The connected devices, separated in different subscriber VLANs, can

subscribe to and unsubscribe from the multicast traffic in the subscriber VLANs.

MVR only responds to IGMP join and leave control messages from multicast groups that

are configured under MVR. Join and leave reports from other multicast groups are

managed by IGMP snooping.

Table of Contents