Cable Test; Host Denial-Of-Service Protection - ZyXEL Communications MES-2110 Support Notes

Managed 8-port 10/100 mbps plus 2-port gigabit dual personality access switch

Hide thumbs Also See for MES-2110:

Table of Contents

MANAGED 8-PORT 10/100 + 2 G DUAL PERSONALITY SWITCH

2.21

Cable Test

Cable Test is used to diagnose the physical copper links connected each port, by

separate pairs in a cable. Before the Cable Test is activated, a confirmation message

"Cable Test will disable normal network functions for one minute. Do you want to

continue?" will pop up for user's confirmation. If the link is well-connected, the Status

column will show "normal". If the link is disconnected, the Status column will show

"open", and the CableLength column will display the estimated distance from the port to

the location where the circuit is open.

2.22

This page enables the user to DENY ACCESS to the Switch's remote management

interfaces to ALL IP addresses EXCEPT the maximum of five addresses that can be

entered on this page.

NOTE: If 'Apply' is activated while the 'Protection' field is enabled and all of the 'IP

Address' fields are left blank or are not enabled, the Switch's remote management

Table of Contents