Port Configuration - ZyXEL Communications MES-2110 Support Notes

MANAGED 8-PORT 10/100 + 2 G DUAL PERSONALITY SWITCH

2.3.1 Port Configuration

Click on each parameter field to modify the desired setting, then click on Undo to
restore previously saved configurations or click on Apply to retain newly entered
information. See description below:
Parameter Description
Port Port types and numbers
Name Assign a name to each port to keep record of your connections
Type Type of connector for each port (auto-detects fiber and RJ-45)
Admin Enable or disable admin configurations
Speed: Status Provides information on speed at which ports are currently operating
Speed: Setting Set speed for RJ-45 ports. (The speed for fiber ports is fixed)
Duplex: Status Provides information on Duplex Status
Duplex: Setting Select half / full duplex modes
Link Provides information on link status
Auto Enable / Disable Auto-negotiation on copper ports
Flow Control Enable / Disable flow control for each port
NOTE: Disable the Auto (Auto-negotiation) function to configure Speed and Duplex.
Click on Undo to restore previously saved configurations or click on Apply to retain
newly entered information.
8