Selecting And Changing Channels; Quick Return To Last Channel Watched - Rcl Button; Volume Control; Volume Mute - Strong SRT 5000 Instruction Manual

Selecting and Changing Channels

There are 2 methods to select and change channels
• Press the required Numeric Button on the Remote
Control.
Please Note: SRT5000 has default
LCN – Logical Channel System
1 = Ten Network & Affiliates
2 = ABC
3 = SBS
7 = Seven Network & Affiliates
9 = Nine Network & Affiliates
• Select and change channels by using the Up/Down
channel buttons.
Quick Return to Last Channel
Watched (RCL Button)
Pushing the RCL (Blue) Button on the remote control
returns you to the last channel that you were watching.

Volume Control

To adjust Volume UP and DOWN,
press the following buttons on the remote control:
Volume Increase:
Volume Decrease:
Important: The Volume Level is dependant on the
volume level that you firstly set within your TV I.e. via
your TV remote control volume setting.
VOL Button +
VOL Button -

Volume Mute

Press Mute button on the remote control
Press Mute button again to reactivate sound.

Picture Pause

To pause the picture, push Pause button on the
remote control.

TV or Radio Selection

To switch between TV and Radio, press the TV/RAD
Button.
23