Updating The Present Vehicle Position; Setting The Voice Guidance Volume - Alpine NVD-T334 Owner's Manual

Setting the System
SOURCE/POWER OK
MENU RTN F/SETUP

Updating the Present Vehicle Position

If the navigation system is not displaying the correct
current position, use this procedure to update the
present vehicle position.
Depending on the GPS signal reception conditions, the
direction of your vehicle may be displayed incorrectly.
Map matching automatically corrects this error, but you
can manually correct it.
1
Press the MENU button to display "NAV. MENU."
2
Select "Navigation Setup" from "NAV. MENU" by
moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
3
Select "Memory Points" from the "Navigation Setup"
menu by moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
4
Select the point that is closest to your present vehicle
position from the "Memory Points" list.
Press the OK button or MODE knob to execute the
selection.
5
The displayed screen changes to the "Edit Memory
Point" menu. Select "Current Position" from the menu
and press the OK button or MODE knob to execute the
selection.
6
When the confirmation message appears, select "Yes"
and press the OK button or MODE knob to execute the
selection.
7
To return to the previous screen, press the RTN button.
To return to the "NAV. MENU" screen, press the MENU
button.
26
-EN
MODE Flipper switch

Setting the Voice Guidance Volume

When the voice guidance of the navigation system
starts, the volume level of any currently playing audio
source is reduced automatically. You can also adjust the
volume level of voice guidance.
To set the volume level of voice guidance
1
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
2
Move the Flipper switch up or down to select NAVI
MIX.
Press the OK button or MODE knob to set.
3
Move the Flipper switch up or down to select ON or
OFF.
Press the OK button or MODE knob to set. The display
returns to the SETUP screen.
4
Press the F/SETUP button to change to the Navigation
mode.
5
When displaying the present vehicle position or voice
guidance, press the MODE (Audio control) knob
repeatedly to select the NAVI MIX mode.
6
Turn the MODE (Audio control) knob until the desired
sound is obtained.
Notes
• If you don't hear the voice guidance, press the VOICE button
to repeat the voice guidance.
• If you have an external audio processor, you can listen to
voice guidance with the extension speaker (KAX-551N).