Screen Position Adjustment; Distance Coefficient - Alpine NVD-V001 SMART MAP PRO Owner's Manual

Customizing (as you like it)

Screen position adjustment

For some TV monitors that can be connected to
the navigation system, the screen display will
be out of place. Adjust the display position to
match the TV monitor you connect to the
system.
Press the MENU button to display
1
the main menu. Select "Set-up"
from the main menu, then select
"CALIBRATION" and press
ENTER.
A sub-menu is displayed. Select
2
"SCREEN ADJ." and press ENTER.
3 The screen position adjustment
screen is displayed.
Adjust the display position with
4
the joystick.
The display screen moves the way you
tilt the joystick.
Press ENTER.
5
The screen is displayed at the adjusted
position.
46

Distance coefficient

The navigation system measures the distance
with the speedometer pulses. Since the speed-
ometer pulses depend on the vehicle manufac-
turer and the tyre size, when you buy a new
vehicle or replace your tyres, the speedometer
pulses are compared with the distance meas-
ured with GPS waves and the distance coeffi-
cient is automatically recalibrated.
You can check on the screen whether or not speed-
ometer pulses are being counted.
Press the MENU button to display
1
the main menu. Select "Set-up"
from the main menu, then select
"CALIBRATION" and press
ENTER.
A sub-menu is displayed. Select
2
"COEFFICIENT" and press ENTER.
Select "CLEAR LEARNING" and
3
press ENTER.
c
a The calibration level is displayed with a bar graph
form.
b The cumulative speedometer pulse count is
displayed.
c If you select this function after replacing your tyres,
the time required for the correction can be shortened.
Confirmation screen asking you
4
whether you wish to execute the
clearance procedure or not. Select
"Yes" if you wish to clear.
a
b