Alpine NVD-T334 Owner's Manual page 13

5
The character pallet is displayed.
Move the cursor to the character to be input by moving
the Flipper switch up or down.
Press the OK button or MODE knob to execute the
character.
a
d
a : Text window
Displays the selected characters.
b : List of the candidate number
c : LIST
Displays a list of the candidate names for the
selected characters.
d : Character pallet
Select the desired character.
e : Return to the previous character pallet before
inputting one character.
Return to the previous character and erase it.
Tips
• When one character is input, the candidates for the next
character are narrowed down (and the others disappear
from the character pallet).
• You can also search for a location by inputting just the start
of its name and selecting "LIST."
• If you want to display the list of candidate city names,
select "LIST," and then press OK button. Skip to Step 7.
6
Repeat Step 5 above to complete the character input
for the city name.
7
The screen changes to the "Select City" list screen.
Select a desired city and press the OK button or
MODE knob to execute the selection.
8
Repeat Step 5 above to complete character input of
the street name.
9
The screen changes to the "Select Street" list screen.
Select a desired street and press the OK button or
MODE knob to execute the selection.
10
The screen changes to the "Option" screen.
Select "Set" and press the OK button or MODE knob to
execute the selection.
b
c
2nd Street:
e
If you know an intersection near where you want to go,
you can input two cross streets as your destination.
The character pallet is displayed. Input a cross street
name.
House Number: use to input a house number.
The character pallet is displayed. Input a house
number.
11
The displayed screen changes.
Select "Start Guidance" and press the OK button or
MODE knob to execute the selection.
Add Way Point:
Use to add waypoints (see the "Adding Waypoints on
the Route," page 17).
Detailed Information:
Use this menu for address, phone number
information, etc., when a location is searched for
using POI Category.
If there is no data for address, longitude and latitude
are displayed.
Register to Memory Points:
Use to register the location. When the confirmation
message is displayed, select "Yes" and press the OK
button to execute the selection.
12
The message appears and route search starts.
13
The displayed screen changes.
Move the cursor to the selected item by moving the
Flipper switch up or down and press the OK button or
MODE knob to execute the setting of the item.
The route guidance to the destination starts.
Quick:
Short:
Alternative: Use to search for an alternative route.
The shortest time route.
The shortest distance route.
13
-EN