Deleting The Destination; Changing The Sequence Of Waypoints - Alpine NVD-T334 Owner's Manual

Deleting the Destination

When the address in the vicinity of the destination is
displayed after arrival at the destination, the point
information is erased automatically. If the route guidance is
cancelled before arrival at the destination or if the address
in the vicinity of the destination is not displayed, the point
information remains. In such a case, delete the destination.
1
Press the MENU button to display "NAV. MENU."
2
Select "Edit Route" from "NAV. MENU" by moving the
Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
3
Select "Delete Destination" from the "Edit Route" menu
by moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
4
When the message appears, select "Yes" and press the
OK button or MODE knob to execute the selection.
The destination is erased and the display returns to the
present vehicle position.
Tip
If you slide the Flipper switch down after setting the
destination, the above message appears. Select "Yes" and
press the OK button or MODE knob to delete the destination
you have set.

Changing the Sequence of Waypoints

The sequence of waypoints to go through can be sorted
in order of distance from the current vehicle position, or
it can be changed in any order as you like.
1
Press the MENU button to display "NAV. MENU."
2
Select "Edit Route" from "NAV. MENU" by moving the
Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
3
Select "Edit Way Points" from the "Edit Route" menu by
moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
4
Select "Sort" from the "Edit Way Points" menu and
press the OK button or MODE knob to execute the
selection.
5
Move the cursor to the desired point by moving the
Flipper switch.
Press the OK button or MODE knob.
6
Move the cursor to the desired position by moving the
Flipper switch.
Press the OK button or MODE knob to execute the
position.
The route searching starts.
19
-EN