Route Setting/Route Editing
OK
MENU
RTN
Deleting Waypoints on the Route
If you want to delete all waypoints, perform following
operation.
1
Press the MENU button to display "NAV. MENU."
2
Select "Edit Route" from "NAV. MENU" by moving the
Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
3
Select "Edit Way Points" from the "Edit Route" menu by
moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
4
Select "Delete" from the "Edit Way Points" menu and
press the OK button or MODE knob to execute the
selection.
• To erase all points (way points and destination),
select "Delete All" and press the OK button or MODE
knob to execute the selection.
When the confirmation message appears, select
"Yes" and press the OK button to execute the
selection.
5
The displayed screen changes. Move the cursor to your
desired waypoint to delete and press the OK button or
MODE knob.
When the confirmation message appears, select "Yes"
and press the OK button or MODE knob to execute the
selection. Its waypoints are deleted.
20
-EN
MODE
Flipper switch
Drive Simulation
You can check the searched route by carrying out the
drive simulation.
1
After searching the route, press the MENU button to
display "NAV. MENU."
2
Select "Edit Route" from "NAV. MENU" by moving the
Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
3
Select "Demo" from the "Edit Route" menu by moving
the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
4
The drive simulation starts.
To exit the drive simulation, press the RTN button.