Advertisement
Chapter 2
Installation
This chapter describes the procedures for installing the rack mountable server into a 19-inch
rack.
Step 1
Convert from tower type to rack-mount type
Pull the hinge pin out. Then slide the front bezel to remove it from the other hinge
(1)
pin and remove the front bezel.
(2) Remove the bezel hinge. (four screws)
Remove five nylon rivets from the top cover.
(3)
Remove four feet from the bottom chassis. (Total eight screws)
(4)
Foot
(5) Fix the device covers together with the dummy covers
which were installed to blank bays in the chassis.
Nylon Rivet
‚S
Hinge Pin
Front Bezel
Device Cover
Front Bezel
Bezel Hinge
Advertisement
