Advertisement
(6) Check to see that no excess force is applied to the cable arm by pulling out the server
and pushing it back in. And this cable arm is rotated to backside for connection of
cables and exchange of the power supply unit. Check to see that no excess force is
applied to the cable arm by rotating it.
(7) Attach cables to the server according to the manual of the server.
Bundle cables to the cable arm by the repeat ties.
(8)
? Attach cables and repeat ties not to contact the slide rails and neighboring units and
the rack.
? Tie cables slackly between the cable arm and the server to avoid of excess force to
be added by pulling out the server and pushing it back in.
? Attach cables to avoid of excess force to the plug of power cords.
‚P‚P
Advertisement
