Os (Bios) Console - NEC Express5800 1160Xd User Manual

OS (BIOS) Console

When you select the OS (BIOS) Console on the iSP Main Menu, input/output is
redirected to the OS (BIOS) serial controller.
To return to the Main Menu, press
The image displayed and the operation during redirection depend on the BIOS and OS
running in the partition; they are therefore not recognized by the service processor
firmware (iSPFW).
OS (BIOS) Console redirection is available only on the master iSP.
Screen Image
iSP MAIN MENU
0) OS(BIOS) serial console of partition#0 (INITIALIZING
1) OS(BIOS) serial console of partition#1 (RUNNING
2) OS(BIOS) serial console of partition#2 (STOPPED
3) OS(BIOS) serial console of partition#3 (FAULT
4) OS(BIOS) serial console of partition#4 (POWER OFF
5) OS(BIOS) serial console of partition#5 (RUNNING
6) OS(BIOS) serial console of partition#6 (NOT CONFIGURED )
7) OS(BIOS) serial console of partition#7 (NOT CONFIGURED )
V) Virtual System Operator Panel
S) iSP commands
E) Exit
DISCONNECTALL) disconnect all console connections
iSPyz> 0<ENTER>
*****redirection of serial console 0
*****enter CTRL+B to quit
<CTRL>+<B>
*****returned from serial console 0 redirection *****
3-8 Service Processor
Table 3-6. OS (BIOS) Console Operation
:
:
:
:
:
(CTRL+B).
^B
*****
*****
Reference
)
)
)
)
)
)
A
B
C
D
E